Re: 308 Emergency Brake Adjustment
From: Peter Rychel (dino308gt4hotmail.com)
Date: Mon, 9 Jul 2018 20:24:05 -0700 (PDT)

These are the stainless screws I had mentioned in my previous email. They’ve gone up in price since I bought my set (good thing they’re essentially good for life):

 

https://www.automotion.com/brake-caliper-plugs-rear-for-914-porsche-1970-1976.html

 

Peter

 

Sent from Mail for Windows 10

 

 


From: Ferrari <ferrari-bounces+dino308gt4=hotmail.com [at] ferrarilist.com> on behalf of Matt Boyd <ferrari308driver [at] gmail.com>
Sent: Monday, July 9, 2018 6:24:50 PM
To: PeterGT4
Cc: The FerrariList
Subject: Re: [Ferrari] 308 Emergency Brake Adjustment
 
rjlloyd on f-chat had a good idea that I'll try on my next attempt. I'll keep the wheel off, tighten the lug bolts on even though the wheel isn't on, then check/adjust clearance.

On Mon, Jul 9, 2018 at 7:36 PM, Matt Boyd <ferrari308driver [at] gmail.com> wrote:
I just posted this on f-chat, but I'm posting it here too to see which forum has a good answer first (competition between f-chat and f-list!). I'll post it on Facebook and see if someone has an idea there first.

Frustrated....

***
Ok, so I've done this job before, and I've done several cam belt services including valve adjustments, so the fact that I'm not having success here is making me very irritable, so I'll vent here in hopes someone can help.

Issue was that the e-brake did next to nothing, and I was replacing tires/doing an oil change, so why not do the adjustment. I have adjusted all four caliper hex thingies such that there is 0.1mm between the pad and the calipers. I've double checked. We're all good.

To reduce confusion, I've completely disconnected the e-brake cable from both calipers.

Now my rear wheels won't turn at all. I have the rear wheels up in the air (jack stands), I put it in reverse, and the wheels do not turn.

Wait, that's not exactly true. If I back off the lug bolts just a tiny bit, one at a time, on the fifth and final loosen, the wheel turns fine. If I have no wheel on and I put the car in neutral, I can turn the wheel disk by hand. But if I put the wheel back on and tighten it (not even to the normal torque setting), I can't even turn the wheel in neutral....until I back off the bolts.

What am I doing wrong? Yes, I have the rear tires in the proper size on the proper wheels.

Thanks for any assistance!

-Matt
'85 Euro 308


Results generated by Tiger Technologies Web hosting using MHonArc.