Re: Removing all moulding (behind eats) on 308 GTSi | <– Date –> <– Thread –> |
From: Brian Keegan (bks281hotmail.com) | |
Date: Sat, 26 Dec 2020 09:17:27 -0800 (PST) |
The center “joint” has two studs that go through the shelf. You will have to get to them from the engine bay. I hope you’re a contortionist! Sent from my iPhone > On Dec 26, 2020, at 9:53 AM, Michel Savard <mysavard [at] videotron.ca> wrote: > > I have a 1981 308 GTSi and I want to redo all the insulation behind the > seats. At a first glance, I can see I need to remove the 2 screws holding the > seat belts. Is there anything else I need to know before I start ? > Tav 110 shows # 21 (2 pieces), 23, 25, 20 need to be removed. > Happy Holidays! > <tav-110.gif> > Michael Savard (1981 308 GTSi) > _________________________________________________________________ > To unsubscribe or modify your subscription options, please visit: > https://lists.ferrarilist.com/mailman/options/ferrari/bks281%40hotmail.com > > Sponsored by BooyahMedia.com > and F1 Headlines > http://www.F1Headlines.com/
-
Removing all moulding (behind eats) on 308 GTSi Michel Savard, December 26 2020
- Re: Removing all moulding (behind eats) on 308 GTSi Brian Keegan, December 26 2020
- Message not available
-
Re: Removing all moulding (behind eats) on 308 GTSi Michel Savard, December 26 2020
- Re: Removing all moulding (behind eats) on 308 GTSi Peter Rychel, December 26 2020
- Message not available
- Re: Removing all moulding (behind eats) on 308 GTSi Michel Savard, December 27 2020
- Re: Removing all moulding (behind eats) on 308 GTSi Robert W. Garven Jr., December 27 2020
-
Re: Removing all moulding (behind eats) on 308 GTSi Michel Savard, December 26 2020
Results generated by Tiger Technologies Web hosting using MHonArc.