Re: '81 308 what size is gas tube to ........ | <– Date –> <– Thread –> |
From: Paul Bennett (pbennett![]() |
|
Date: Sat, 30 Sep 2006 22:44:29 -0700 (PDT) |
>1981 308 GTSi: What is the size (length and diameter) of the black rubber gas >tube that goes from the fuel pump to the bottom of the left gas tank? I don't recall who originally posted this - it is for a carbed car... *********************************** Here is a list of the hose sizes and lengths that I used when I did my 80 carded gtb euro last winter. Use these sizes and lengths only as a start. I am sure some things will have changed over the years (especially those with the fuel system). I used some 1.5" silicon tubing I purchased from Rutlands to make the small coolant couplers. It was exspensive at something like $40 a foot, but I only want to do it once. I also replaced every hose clamp with aba smooth style clamps (about $250 worth of clamps). Everything said and done replacing EVERY hose on the car except for the air horn line and the water drain out of the AC I think it came close to $1000 for everything (not cheep but need to be done, most hose were still original). listed by type, description, diameter, length Coolant drivers side heat exchanger inside to T 1/2" 16? Coolant heat control valve to T 5/8? 6.5? Coolant pass side heat exchanger inside to T 1/2" 36? Coolant engine to heater switch 5/8? 131? Coolant pass side heat exchanger outside to return T 1/2? 29? Coolant driver side outside heat exchanger to return T 1/2? 27? Coolant return T to large line to radiator 5/8? 72? Coolant exspansion tank to water pump 3/4" 20? Coolant exspansion tank to water pump 3/8? 20? Coolant 1.5 couplers on hard lines/water pump/ etc. 1 1/2" 3-5?x 9 pieces Coolant 1.5 90 degree bend on radiator drivers side top 1 1/2" NA Vacuum engine to one way valve 1/2? 9? Vacuum one way valve to brake booster 1/2? 132? AC dryer to expansion valve 5/16? 8? AC condenser to dryer 5/16? 21? AC compressor to expansion valve 1/2? 112? AC compressor to condenser 13/32? 134? Fuel pass side carbs front to back 5/16? 6? Fuel drivers side carbs front to back 5/16? 3? Fuel drivers side back carb to pass side back carb 5/16? 13? Fuel fuel pump to drivers side front carb 5/16? 58? Fuel return line from pass side front carb to pass tank 1/4" 21? Fuel fuel pump to filter 5/16? 12? Fuel fuel tank to pump 5/16? 8? Fuel fuel filler to tank crossover hard line 5/8? 10? Fuel drivers side tank to crossover hard line 5/8? 5? Fuel pass side tank to crossover hard line 5/8? 5? Washer from windshield washer tank to splitter 3/32?? 64? Washer from splitter to drivers side nozzle 7/64?? 11? Washer from splitter to pass side nozzle 7/64?? 14? Emissions coupler on valve cover breathers 3/4" 2?x 2 pieces Emisions dry sump tank to valve breathers 3/4" ? Emissions dry sump tank to air box 3/4" ? Emissions transmition vent line 15/32? 45"
-
'81 308 what size is gas tube to ........ Michel Savard, September 30 2006
- Re: '81 308 what size is gas tube to ........ Paul Bennett, September 30 2006
Results generated by Tiger Technologies Web hosting using MHonArc.