Ferrari Mailing List: Re: 87 328 throttle

[clyde (clyderomero]

Drive the car to the ghetto and....
Get some locktight and put it on that screw
You will be fine my son

Clyde has spoken!


Sent via BlackBerry from Cingular Wireless

-----Original Message-----
From: vikelj [at] comcast.net
Date: Thu, 30 Nov 2006 12:35:34 
To:clyde <clyderomero [at] worldnet.att.net>
Cc:The FerrariList <ferrari [at] ferrarilist.com>
Subject: [Ferrari] 87 328 throttle

I have a 1987 328 GTS.  A few days ago, I was driving along when the car 
suddenly lost power.  I pulled to the side of the road and the car was idling 
just fine but nothing happend when I stepped onto the gas.  I opened the hood 
and discovered that the throttle screw which hold the throttle had come almost 
out.  I screwed it in hand tight and was able to drive the car home.  When I 
got home, the throttle screw had back out some more.  I tightened it with a 
wrench real tight.  That made the throttle stick so I loosened it it and it 
worked fine.  However, it keeps backing out and I have to tighten it every few 
days.  Anyone have this problem before and what was the solution.  Its a brass 
colored screw with a spring behind it.  It hold the throttle mechanism into the 
accelerator cable.  If it gets too loose the little piece which goes into the 
throttle comes out and does not engage the cable.  Any ideas on how to make it 
stop backing out?  Thanks.
Jim

--
http://home.comcast.net/~vikelj/page3.html
Law Offices of James V. Cunningham
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/clyderomero%40worldnet.att.net

Sponsored by BidNip.com eBay Auction Sniper