Ferrari Mailing List: Re: Metric Hardware

[LarryT (l02turner]

You've really be happy the next time you're working on sime metric beauty 
and a 6mm nut rolls out of sight - never to see the light of day again - and 
then you see those boxes of assortments and walk over, open the right box 
and see off to the left a little compartment containing 6mm nuts with lock 
washers. etc -

You'll say yahoooo and continue -
;-)

Sincerely,
Larry T  (74 911, 91 300D 2.5T)
www.youroil.net Oil Analysis Kits &
Porsche Posters/Weber parts
.
----- Original Message ----- 
From: <georgedodson [at] comcast.net>
To: "Larry Turner" <l02turner [at] comcast.net>
Cc: "The FerrariList" <ferrari [at] ferrarilist.com>
Sent: Thursday, November 13, 2008 5:37 AM
Subject: Re: [Ferrari] Metric Hardware


> Thanks everyone for the tips on metric Hardware. I picked up three
> assortments from Bolt Depot. They ranged from about $37 to about $74 and
> contain roughly 20 ea. of  each class/size of fastenerr. They arrived
> yesterday.They are nicely packaged and a good value. The packs fit nicely 
> in
> the old IBM Card pull-out file cabinet that I use for storing small
> hardware. I got it for $10 on surplus from the laboratory where I worked 
> at
> the time. Asside from economical dry storage, it would make an impressive
> boat anchor.  Thanks again.
>
> Regards,
> George
>
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> http://lists.ferrarilist.com/mailman/options/ferrari/l02turner%40comcast.net
>
> Sponsored by BooyahMedia.com
> and F1 Headlines
> http://www.F1Headlines.com/