Doodads
From: RASCO80 (RASCO80comcast.net)
Date: Sun, 23 Nov 2008 13:45:24 -0800 (PST)
Jerry, Sometimes those doodads can be fixed.  Take a magnifying glass and look 
inside the doodad.  There are 3 or 4 spring loaded grippers in the doodad and 
sometimes they get bent when you press them to hard on the thingamajig.  Use a 
slim ice pick or needle and move them around, one is probably bent and bend it 
back into position. The other grippers should then move freely.  Give it a try 
and if it works you can save the snap and the horsey.  Bob
  • (no other messages in thread)

Results generated by Tiger Technologies Web hosting using MHonArc.