Ferrari Mailing List: Re: '83 Mondial QV fuel injection

[Richard Rainbolt (ricrainbolt]

>From memory, I think... if you have the circlips (C-rings, seeger, etc.)
then you don't have the screw in and v.v.

It appears from the pix that you have the screw in type.

RR

On Thu, Dec 25, 2008 at 2:56 PM, Rick Lindsay <rolindsay [at] yahoo.com> wrote:

> Folks, I just wrote a huge note with lots of descriptions and links to
> photos - then accidentally hit the 'back' button and lost all my prose.  I
> then said, "Poop!"
>
> Go to http://www.aubard.us/Mondial/ and start with picture HPIM1316.JPG up
> through HPIM1336.JPG.  The last image is a tool that Rui made to remove the
> injectors, http://www.aubard.us/Mondial/P1074035.JPG .  I'll make a
> similar tool for my car.  it dies appear from these pictures that my car
> uses the earlier screwed-in retainers so the injector assemblies will need
> to be unscrewed from the manifold.  That may be an 'interesting' process
> given the 25+ year installed life.  If anyone can tell if these are the
> later pressed in retainers, please advise.
>
> Best regards,
>
> rick
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
>
> http://lists.ferrarilist.com/mailman/options/ferrari/ricrainbolt%40gmail.com
>
> Sponsored by BooyahMedia.com
> and F1 Headlines
> http://www.F1Headlines.com/ <http://www.f1headlines.com/>
>