Re: General Part Question | <– Date –> <– Thread –> |
From: Hans E. Hansen (FList![]() |
|
Date: Sun, 6 Feb 2011 20:08:23 -0800 (PST) |
Ditto.
In some of my other lives, I deal with micro parts, threads, etc. It's
not rocket science. Get the correct tap. They are not expensive,
but you might have to wait a week or so to receive them. Well
worth the investment. Repeat: Well Worth The Investment.
Hans.
On Sun, Feb 6, 2011 at 5:37 PM, Martin Stark <MStark [at] copper.net> wrote:
Use a sharp metric tap and if you're cutting plastic use a lubricating solution of 50% dish washing liquid 50% water. Go slow and back the tap out frequently to clear the chips.
Charles Perry wrote:
Having solved the electrical irritation in the Diablo, I proceeded to changing the sticky exterior door handles (same problem as Ferraris) with some nicer CF laminated ones from MACarbon.After getting the first one inserted, though, I found a problem. The door handles are plastic. Molded into them are threaded metal inserts which take a 10mm bolt to secure them to the door when installed. When Lambo or their supplier molded the replacements, they got a lot of plastic into the inserts. I can see the threads and a little metal, but their diameter has shrunk way too much to get the original bolts into.I tried scraping the insides with a sharp right angle tool to "clean" out the plastic, but the plastic is quite hard. I'm agraid to get more aggressive as I don't want to damage the underlying threads.I suppose I could get a metric tap/die set and do it that way, but I'm still concerned about cross-threading the existing insert, or worse, breaking it loose in the plastic so it just spins, ruining the expensive part.Any other ideas? I've contacted MACarbon but I don't think it was their fault - I think they got them this way.Thanks!-- charles
________________________________________________________
![]()
Charles G Perry IV
Vice-President, Engineering
Carolina Sound Communications – MuzaK
7630 Southrail Road, BLDG B
N. Charleston, SC 29420
(843) 571-4488 x105 www.carolina-sound.com
________________________________________________________________
_________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/mstark%40copper.net Sponsored by BooyahMedia.com and F1 Headlines http://www.F1Headlines.com/
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/flist%40hanshansen.org
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
-
General Part Question Charles Perry, February 6 2011
-
Re: General Part Question Martin Stark, February 6 2011
- Re: General Part Question Hans E. Hansen, February 6 2011
-
Re: General Part Question Charles Perry, February 15 2011
- Re: General Part Question Martin Stark, February 15 2011
-
Re: General Part Question Martin Stark, February 6 2011
Results generated by Tiger Technologies Web hosting using MHonArc.