Re: weber carb parts
From: Rick Lindsay (rolindsayyahoo.com)
Date: Sat, 6 Oct 2012 06:50:09 -0700 (PDT)
Thanks Michael,

Pierce Manifolds sells the parts as well but the linkage is another story.  PM 
sells new linkage but it's snap on,  not secured by and adjustable 
screw-thingie.  Yes, it could substitute, in total.  A FerrariChat member had a 
spare 'screw thingie' and is sending it to me.  But that doesn't mean that I 
don't appreciate the reference.  Thank you.

-rick



------------------------------
On Sat, Oct 6, 2012 8:17 AM CDT Michael Maulucci wrote:

>Hi Rick, Ferrari list,
>There is a co on Long Island that sells Weber carb parts separately.
>Just in case you can't find them anywhere else try www.carbsdirect.com and
>www.carbs.net
>
>Mike
>
>
>-----Original Message-----
>From: Rick Lindsay [mailto:rolindsay [at] yahoo.com] 
>Sent: Friday, October 05, 2012 10:41 AM
>To: michaelmaulucci [at] comcast.net
>Subject: Re: carbs
>
>
>
>Hi Mike,
>
>Kits from Recambi, as I recall, but today I'd go to Pierce Manifold first.
>I've had the kits for months, being too lazy to do the job in Houston's
>summer heat.
>
>Yes, new accelerator pump diaphragm in kits.  For the same new fuel reason,
>I'm replacing all the fuel lines with modern hose.  Granted, carbed car
>hoses only see about 4psi of pressure, but since everything is already
>exposed...
>
>The wrinkle black is stock, as was used on the GT4 Euros.  May be associated
>with the dry sump Euro Spec.
>
>-rick
>
>------------------------------
>On Fri, Oct 5, 2012 9:03 AM CDT Michael Maulucci wrote:
>
>>Hi Rick,
>>
>> 
>>
>>Nice job, I like the black crinkle finish on t he heads.
>>
>> 
>>
>>When you rebuilt the carbs did you replace the accelerator pumps
>diaphragms?
>>
>>Where did you get the kits to rebuild? 
>>
>> 
>>
>>I have had an issue with the fuel pump going bad because of the ethanol gas
>>eating the diaphragm in the pump.
>>
>> 
>>
>>I am now worried that the carbs will be affected now, they have rubber
>>diaphragms in the accelerator pump also.
>>
>> 
>>
>>Regards,
>>
>>Mike
>>
>> 
>>
>> 
>>
>

  • Re: weber carb parts Michael Maulucci, October 6 2012
    • Re: weber carb parts Rick Lindsay, October 6 2012

Results generated by Tiger Technologies Web hosting using MHonArc.