Ferrari Mailing List: Re: Hose clamps used with silicone hoses

[Peter Rychel (dino308gt4]

Original or aftermarket?

Aftermarket choice would be Mikalor (or the equivalent style).

Just don't use screw clamps that have exposed, screw teeth cuts along the banding. Silicone hose is much softer than nitrile-type hosing, so those screw cut openings tend to mess up the hose. The banding should be smooth and continuous all around and even better is if the edges have a slight rolling up, to again, prevent the clamp from cutting the hose.

Peter

---

From: Ferrari <ferrari-bounces+dino308gt4=hotmail.com [at] ferrarilist.com> on behalf of Clarence Romero Jr. <clyderomerof4 [at] gmail.com>
Sent: October 2, 2017 4:06 PM
To: PeterGT4
Cc: The FerrariList
Subject: [Ferrari] Hose clamps used with silicone hoses

 

Guys what the brand of hose clamps used with silicone hoses?

     RF4-4EVR

Scars are Tattoos with better stories !

If you have no enemies, you have no character !

Clyde Romero    

Confidentiality Notice:  This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material.  Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited.

This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged.  If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED.  If you have received this transmission in error, please immediately notify us by reply e-mail at Clyde.romerof4 [at] gmail.com or  by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.