Ferrari Mailing List: Re: Robs Clutch Adventure Part II

[Clarence Romero Jr. (clyderomerof4]

I put many a motor together with it 

     RF4-4EVR

Scars are Tattoos with better stories !

If you have no enemies, you have no character !

Clyde Romero    

Confidentiality Notice:  This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material.  Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited.

This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged.  If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED.  If you have received this transmission in error, please immediately notify us by reply e-mail at Clyderomerof4 [at] gmail.com or  by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.

On Jan 18, 2019, at 9:36 PM, Hans E. Hansen <FList [at] hanshansen.org> wrote:

Actually, didn't know they still made the stuff. Was known as "motor honey"

Hans. 

On Fri, Jan 18, 2019, 6:34 PM Hans E. Hansen <FList [at] hanshansen.org wrote:

Ask Andi Granetelli

<rgarven [at] gmail.com wrote:

What is STP??

Rob

On Jan 18, 2019, at 4:50 PM, Rick Moseley <ramosel [at] pacbell.net> wrote:

What is your pilot bearing??

A bearing - leave it dry

A scintered Bronze bushing - leave it dry

A steel bushing - a little STP, like cLyDe said

On Friday, January 18, 2019, 2:44:06 PM PST, Robert Garven <rgarven [at] gmail.com> wrote:

Friends,

I’m putting my bell housing on and I just wanted to make sure what type of grease if any

That you put on the splined shaft that goes into the pilot bearing and clutch disk? 

I don’t want any grease to be flying up onto the clutch disk! 

Thank you for any suggestions or warnings!

Rob

<IMG_0735.jpeg><IMG_0743.jpeg>

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/ramosel%40pacbell.net

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

<IMG_0743.jpeg><IMG_0735.jpeg>

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/flist%40hanshansen.org

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/clyderomerof4%40gmail.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/