Ferrari Mailing List: Re: Robs Clutch

[Peter Rychel (dino308gt4]

Wow, and it’s not too outrageously priced either (you’d be hard pressed to have one custom machined for less).

 

Peter

 

Sent from Mail for Windows 10

 

 

---

From: Ferrari <ferrari-bounces+dino308gt4=hotmail.com [at] ferrarilist.com> on behalf of Robert Garven <rgarven [at] gmail.com>
Sent: Saturday, August 31, 2019 8:49:48 PM
To: PeterGT4 <dino308gt4 [at] hotmail.com>
Cc: The FerrariList <ferrari [at] ferrarilist.com>
Subject: Re: [Ferrari] Robs Clutch

 

Friends,

It looks like it 103999 that rod arm was superceeded to 116329 which in this Ferrari photo is longer than

the original. Maybe someone else had the same problem. I'll try to get a new one from Brian, wow 

this is way cool! fingers crossed.

Rob

On Aug 31, 2019, at 7:22 PM, Robert Garven <rgarven [at] gmail.com> wrote:

Friends,

I got my clutch completely adjusted perfectly, however the rod arm that connects the turnbuckle on the

clutch mechanism only screws in about 3 threads which make me uncomfortable. If I could find a longer

rod arm it would make all my problem go away!  It has left and right handed threads

The original is M7x 1.00 x 155mm long. A perfect one would be M7 x 1.00 x 165mm-175mm. 

Of course anything longer could be cut down. If anyone has any leads on where I could get one

or a shop that would make me one that would be perfect. 

BTW I spent 4 full days on something that should take 5 minutes, not sure any want to hear the gory details

but this is about the only option to get this GT4 to feel perfect just like my other one.

Thanks in advance,

Rob

<IMG_3715.jpeg>