I've got some feeler gauges you could get in there... Looks like one of those things where the motor was finally placed in the car and they just got lucky with the fit. And, after a 3 Cinzano lunch it got signed off. Ok for those of you who are now seeing the picture that huge bar is the front sway bar And you can’t get the 24mm open end wrench to the sending unit without lowering the bar Besides that the motor tray is a bitch to remove just to get to the damn thing Don’t you just love Ferrari? Those of you who have these new cars with under trays beware If you have a leak You won’t know it until it too late Anyway I’ve got 6 k miles on the car since I’ve picked it up in late May I am now at 32k plus Will keep you updated For those of you who wash and wax your cars to death Get out and enjoy the car It’s not going up in value! It’s like a condom Most fun when used!
![]() RF4-4EVR
Scars are Tattoos with better stories !
If you have no enemies, you have no character !
Clyde Romero
Confidentiality Notice: This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material. Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited. This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify us by reply e-mail at Clyderomerof4 [at] gmail.com or by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk. <image1.jpeg>
See if this makes it out to the list. Clyde, is the sending unit problem similar to the issues the 550 had?
Apparently, they are prone to corrosion due to the location and installation.
There is a cover available through Ricambi that protects the location of the unit from water and debris. Ok since I never see my own posts Did the pictures get out?
![]() RF4-4EVR
Scars are Tattoos with better stories !
If you have no enemies, you have no character !
Clyde Romero
Confidentiality Notice: This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material. Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited. This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify us by reply e-mail at Clyderomerof4 [at] gmail.com or by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.
|
pacbell.net)