Ferrari Mailing List: Re: I need 'vibration damping support'

[Michel Savard (mysavard]

Dimensions are good except for the studs. Mine are 12mm.

I’ll try to go to a local auto parts today if they are open.

Michael Savard (1981 308 GTSi)

On Apr 8, 2020, at 9:11 AM, Brian Keegan <bks281 [at] hotmail.com> wrote:

The original mounts, p/n 102947 are 20mm high, 25mm diameter with a 6mm stud on each end.

Rutlands has them in stock for $11.88 each.

---

From: Ferrari <ferrari-bounces+bks281=hotmail.com [at] ferrarilist.com> on behalf of Rick Moseley <ramosel [at] pacbell.net>
Sent: Tuesday, April 7, 2020 10:27 PM
To: 4redude <bks281 [at] hotmail.com>
Cc: The FerrariList <ferrari [at] ferrarilist.com>
Subject: Re: [Ferrari] I need 'vibration damping support'

 

https://www.mcmaster.com/isolators/vibration-damping-sandwich-mounts/

On Apr 7, 2020, at 6:28 PM, Michel Savard <mysavard [at] videotron.ca> wrote:

I need to change my 3 ‘vibration damping supports’ holding my oil cooler in place as they are called in the parts manual (1981 308 GTSi). The usual Ferrari parts sites sell them for about $15.00 each. I saw a few on Amazon but don’t have a clue which one to choose just looking at the pictures. They have those M4, M6, M8 models, etc.
Anybody can help me find them ?
Michael Savard (1981 308 GTSi)
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/ramosel%40pacbell.net

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/mysavard%40videotron.ca

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/