Ferrari Mailing List: Re: Half a u-nut good enough for seat nut repair

[Hans E. Hansen (FList]

Are you sure it's actually holding anything? Just having the "nose" of the U-nut sticking in the floor isn't going to anchor it, unless I'm mid-interpreting. Loosen the other 3 bolts a bit and then pull up on the corner with the U-nut to see if it is truly anchored to the floor.

I certainly might not be understanding exactly what you did here, but unless that U-nut flares out like a wall anchor bolt, I'm a bit skeptical. Or if you managed to get the flat portion under the floor itself. 

Hans. 

On Sat, Feb 13, 2021, 10:30 AM Michel Savard <mysavard [at] videotron.ca> wrote:

I fixed my passenger seat bolt with a missing nut under the car on left front corner with a half u-nut. I put the u-nut between the floor and the seat-rail. If you look carefully on the final picture you can see a corner of the half u-nut under the rail. Last week I sent a picture of the u-nut as I bought it. The 2 pictures today are u-nut cut in half and then once installed. You need to put the 2 back bolts in very loose first and then lift the front part of the seat-rail to squeeze in the half u-nut. Push back the seat on floor. Tighten everything up. That’s it.

Michael Savard (1981 308 GTSi)

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/flist%40hanshansen.org

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

Attachment: u-nut coupé.jpeg
Description: JPEG image

Attachment: u-nut après.jpeg
Description: JPEG image