Re: 288GTO Vs 308/328 | <– Date –> <– Thread –> |
From: Rick Lindsay (rolindsay![]() |
|
Date: Fri, 20 Jul 2007 05:14:37 -0700 (PDT) |
I think Ric said that the parts are interchangable, just not the same because of composition. Did I read that wrong? rick --- LarryT <l02turner [at] comcast.net> wrote: > Hi Ric, > Thanks for the very detailed comparision! The depth > of knowledge on this > list always amazes me. > It;s easy to see how passionate all of you are about > these great cars! A > 328GTSi is still high on > my list of "cars to buy" when the money is available > - although the 355 & > 360 are pretty high on that list also. > > I am curious about one of your comments - > You wrote:<<Neither is the front bonnet > [interchangible], as I think it's > composite (vs. aluminum on the 308's). The roof > panel is not > interchangeable either for the same reason>> > > Why would the material of construction prevent a > part from being > interchangible - as > long as the dimensions are the same? > > Larry T (67 MGB, 74 911, 78 240D, 91 300D) > www.youroil.net for Oil Analysis and Weber Parts > Test Results http://members.rennlist.com/oil > PORSCHE POSTERS! youroil.net > Weber Carb Info > http://members.rennlist.com/webercarbs > . > > ----- Original Message ----- > From: "Ric Rainbolt" <ricrainbolt [at] gmail.com> > To: "Larry Turner" <l02turner [at] comcast.net> > Cc: "The FerrariList" <ferrari [at] ferrarilist.com> > Sent: Friday, July 20, 2007 4:38 AM > Subject: Re: [Ferrari] 288GTO Vs 308/328 > > > > There seems to be much misinformation about this > car. > > > > The engine is the basic 4 valve 308 motor. The > block is virtually > > identical to that used in the 308QV and 328. Oher > than some hardware > > pickup points, the casting is the same. The liners > are different as > > the bore is 80mm (vs 81 in 308's). The crankshaft > is identical and > > carries the same part number as that found in all > 308s, and 208s. The > > con-rods are unique to the 288 and F40, but the > bearings, bearing > > caps, front crank damper are all from the 308 > design. The pistons are > > lower compression, but similar to those used in > the 4V cars. The > > cylinder heads have some minor casting difference > but are virtually > > identical to 308 QV heads. The camshafts are the > same part numbers as > > the euro 308 QVs. > > > > The front timing cover is almost identical to that > used in the dry > > sump GTBs, as is the sump pumping system. The oil > pan and rear covers > > are unique to the GTO. > > > > The body uses the same front glass, door glass, > rear glass and > > taillights as a 308 GTB. Other small odds and ends > are > > interchangeable (side markers, the headlight > buckets) with 308s. > > > > The car is approx 4 inches longer in wheelbase, > and wider due to > > wider tires, not due to chassis width. The door > skins are not > > interchangeable. Neither is the front bonnet, as I > think it's > > composite (vs. aluminum on the 308's). The roof > panel is not > > interchangeable either for the same reason. The > front and rear > > bumpers are unique as well. > > > > The brakes are the same ATE system used on the TR > (similar to the > > 308, but larger pads and rotors). The ignition > system is unique to > > the GTO. The steering rack is a TRW metric rack, > just like the 308, > > but has a different ratio. > > > > The front and rear suspension components are > similar in design to the > > TR, but carry different part numbers. > > > > Thus endeth the trivia lesson, > > Ric Rainbolt > > > > > _________________________________________________________________ > > To unsubscribe or modify your subscription > options, please visit: > > > http://lists.ferrarilist.com/mailman/options/ferrari/l02turner%40comcast.net > > > > Sponsored by BidNip.com eBay Auction Sniper > > http://www.BidNip.com/ > > and F1 Headlines > > http://www.F1Headlines.com/ > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.5.476 / Virus Database: 269.10.9/907 - > Release Date: 7/18/2007 > > 3:30 PM > > > > > > _________________________________________________________________ > To unsubscribe or modify your subscription options, > please visit: > http://lists.ferrarilist.com/mailman/options/ferrari/rolindsay%40yahoo.com > > Sponsored by BidNip.com eBay Auction Sniper > http://www.BidNip.com/ > and F1 Headlines > http://www.F1Headlines.com/ >
- Re: 288GTO Vs 308/328, (continued)
- Re: 288GTO Vs 308/328 Rui Gigante, July 19 2007
- Need your vote (NFC) Jeff Greenfield, July 19 2007
- Re: 288GTO Vs 308/328 Ric Rainbolt, July 20 2007
- Re: 288GTO Vs 308/328 LarryT, July 20 2007
- Re: 288GTO Vs 308/328 Rick Lindsay, July 20 2007
- Re: 288GTO Vs 308/328 LarryT, July 20 2007
- Re: 288GTO Vs 308/328 cmlf1, July 20 2007
- Re: 288GTO Vs 308/328 clyde, July 20 2007
- Re: 288GTO Vs 308/328 Rui Gigante, July 20 2007
Results generated by Tiger Technologies Web hosting using MHonArc.