Ferrari Mailing List: Re: Weber Choices?!

[clyderomero (clyderomero]

Wew
I don't know if it can be done with that config LS
You might be better off just dropping a small block in 
My 2 cents
Sent via BlackBerry by AT&T

-----Original Message-----
From: LS <lashdeep [at] yahoo.com>

Date: Fri, 6 Mar 2009 18:42:26 
To: clyde<clyderomero [at] worldnet.att.net>
Cc: The FerrariList<ferrari [at] ferrarilist.com>
Subject: [Ferrari] Weber Choices?!



Okay guys, who has some experience spec-ing out Webers?

I am considering the build (rebuild) of a "sick" motor for the '66 GT350.

I will most likely buy an already built 289 from Cobra Automotive. A friend of 
a friend has one for his SVRA supersonic bitch slappin' race car.

It's a cast iron 1960s build date 289 with "stock" heads per vintage spec. CA 
builds their engines with some pretty nice hardware...forged everything with a 
nutty camshaft. Unfortunately, it runs on some sort of rocket fuel that you can 
only pronounce wearing a labcoat.

Approx current specifications (otherwise top secret):

Car-

'66 GT350
2780 lbs with 1/2 tank in full street specification with heater, radio, carpet, 
everything!
4 spd Top Loader (1:1 4th)
3.50 final drive ratio

289-292 cu inch (4.7-4.8 liter)
Iron Block
Iron Heads
Solid Lifter Cam
Carb from NASA
Air Filter from Trak Auto
Actual Dyno output 540hp [at] 8500rpm
Redline-9000rpm

I would like to purchase this motor and rebuild it to run on pump gas.

Required Changes-

Lower compression pistons -11.7:1 forged
Less raucous camshaft from 600+ exh lift
T304 long tube headers...unstepped
HPipe to Glasspacks and side exit exhausts (3 inch)

The question...what Webers are going to support this mess? I'd like something 
close to 450-70bhp.

48IDAs will flow..but the stacks are tall. 

44IDFs will fit but will they flow enough?

I plan to drive this car with no pants on.

Thanks,
LS


      
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/clyderomero%40worldnet.att.net

Sponsored by BooyahMedia.com 
and F1 Headlines
http://www.F1Headlines.com/