Re: bent blade in metering device
From: David Handa (davedavehanda.com)
Date: Sat, 4 Jun 2011 19:18:08 -0700 (PDT)

Two suggestions:

 

1)       Call Daniel at Ricambi and speak with him directly…he might have an alternate suggestion.

2)      Post on Fchat, you will cast a much wider net there. 

 

Good luck  Michael.

 

Dave

 

 

From: Michel Savard [mailto:mysavard [at] videotron.ca]
Sent: Saturday, June 04, 2011 7:16 PM
To: dave handa
Cc: The FerrariList
Subject: [Ferrari] bent blade in metering device

 

1981 308 GTSi: My mechanic had trouble with the fuel mixture set up. Upon extra analysis, he found out that my blade in the metering device (tav 12 #1 part #115329) is bent or a bit curved. This is just under the air filter. He said he can't get it straight since this is an aluminium part and very fragile. At RICAMBI, I clicked #115329 and they wrote $3,646.00 for the whole part.

 

Anybody has any solution ?

 

Anybody has a good used one to sell ?

 

7 days before the Canadian Grand Prix.

 

Thank you!

Michael Savard

Results generated by Tiger Technologies Web hosting using MHonArc.