Ferrari Mailing List: Re: Replacing 512TR Front Lift Struts

[cjromero (clyderomerof4]

The 512 does not have front hood struts. 

Clyde 

Sent from my iPhone

On Mar 30, 2013, at 3:19 PM, Larry Bard <larrybard [at] hotmail.com> wrote:

Thank you.  (Also thanks to S. Sherman for his response.)

I'm guessing that the struts you replaced were not on a 512TR.  But in any case, I just took a closer look at my car, and the struts I bought, and I remain completely confused by the disparity in hardware.  The struts I bought (like the ones pictured in the link I sent, which I guess are what most hood struts look like), which are supposed to work on my car according to the vendor, don't even remotely resemble the supports purchased for my car's hood.  On each side of my hood there are two supporting members, each of which has a rectangular cross section -- no cylinder, at least on the portions (6 inches or so) that are visible.

Could any 512TR owners (Clyde, SJ, ??) take a look at their [front] hood struts and tell me if they're as I described, rather than as pictured?

Larry

---

Date: Sat, 30 Mar 2013 14:08:00 -0400
From: mstark [at] copper.net
To: larrybard [at] hotmail.com
CC: ferrari [at] ferrarilist.com
Subject: Re: [Ferrari] Replacing 512TR Front Lift Struts

Check to see that the end hole diameter is the same as the current ones.  I had to slightly enlarge those on the replacements I bought.  Have a pair of heavy duty long nose (needle nose) pliers handy to remove and replace the cotter pins.  I went in through the battery box on the passenger side and found that replacing only that side was sufficient.
 

On 3/30/2013 1:26 PM, Larry Bard wrote:

Mine didn't work any longer, so bought a set of these:
http://www.ebay.com/itm/StrongArm-6280-L-R-2-Front-Hood-Gas-Lift-Supports-Bonnet-Lift-Support-Strut-/330896118150?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d0af21186&vxp=mtr#vi-ilComp

Although my first impression is that they look much different than the struts now installed in my 1992 512TR, and I'm not known for my mechanical abilities, I'm willing to give the job a try.  But before I do, any tips (other than to find a friend who's experienced and competent to help)?

Thanks,
Larry

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/mstark%40copper.net

Sponsored by BooyahMedia.com 
and F1 Headlines
http://www.F1Headlines.com/

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/clyderomerof4%40bellsouth.net

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/