| Re: Converting a US 308 motor to a Euro 308 motor | <– Date –> <– Thread –> |
From: Erik Nielsen (judge4re gmail.com)
|
|
| Date: Thu, 4 Sep 2014 11:55:59 -0700 (PDT) | |
Wouldn't it just be cheaper to get a 360 with a 6 speed manual?
On Thu, Sep 4, 2014 at 1:23 PM, Matt Boyd <ferrari308driver [at] gmail.com> wrote:
I really like the thread on f-chat of the guy in California that had Nick's Forza Ferrari do a full workup on his 308 to include a 4.0L bore in his 308 motor. I think they're finally putting the car on the dyno today, but it is normally aspirated and "de-tuned" to approximately 440HP (computer simulation). The real test will be on the real dyno. To do that requires tons of additional work as detailed in that thread, but also requires tons of additional $$ (the guy wouldn't answer the "how much" question but concurred it was well over $50k). The curious part of all of it is that he wasn't initially looking for all this power, but instead frustrated with high levels of maintenance, and he was faced with a ~$25k rebuild due to a failed head gasket and so he asked Nick how to make it more reliable. Part of the upgrades is custom cam pulleys (and cam belt drive gears) to incorporate modern cam belt technology which means normal 90k service intervals. That would be almost as exciting as tire smoke....almost....On Thu, Sep 4, 2014 at 2:14 PM, LS <lashdeep [at] yahoo.com> wrote:Matt, my advice is to get a spare motor and go big...REAL BIG.4.0 Liter, lighter con rods, crank, Motec, Electromotive or BIG WEBERSYou will not regret it.Clyde's advice, as always, is good for reliability but when was that really a top concern?When was the last time you started your car and then took your shirt off and yelled "YEAH M-F'er....I JUST SUCCESSFULLY STARTED MY CAR!!!"Tire smoke all day...LScentralwines-spirits est 1934625 e street nwwashington, dc 20004
From: Matt Boyd <ferrari308driver [at] gmail.com>Sent: Thursday, September 4, 2014 1:48 PM
Subject: Re: [Ferrari] Converting a US 308 motor to a Euro 308 motor
That's the crux of my discussion point. I already have the Euro car with all the fun cosmetic upgrades like the front spoiler, euro bumpers, driving lights, flash to pass lights, etc. I also already have the non-restrictive emissions (no cats). I also don't have the heavier bumpers or door reinforcments. I want to focus ONLY on the motor.If I put a US motor in my car, would I have to do any mods to make it work out of the box? If I put a US motor in my car, could I put my Euro cams into the motor with no additional work and make it identical to a Euro motor?-MattOn Thu, Sep 4, 2014 at 1:36 PM, LS via Ferrari <ferrari [at] ferrarilist.com> wrote:
The Euro cars are lighter without a doubt which helps performance but the engine is quite different.The cam timing is much more aggressive and the exhaust is less restrictive. US vs Euro idle quality is like a race motor vs a Camry.LS
centralwines-spirits est 1934625 e street nwwashington, dc 20004
From: Fellippe Galletta <fellippe.galletta [at] gmail.com>Sent: Thursday, September 4, 2014 7:17 AM
Subject: Re: [Ferrari] Converting a US 308 motor to a Euro 308 motor
You serious about the TR power difference?Wow, I never heard that. Pretty crazy.I think with 308s, it's possible that there's a healthy gap as well probably because of the smog equipment and how it was dealt with. At least on the carbureted cars....the injected shouldn't be too far off.And agree about the displacement. Now that a lot of equity has been made owning a 3x8 car, makes a lot of sense turning one into a 3.4 or 3.5 liter beast.FGOn Thu, Sep 4, 2014 at 12:08 AM, LS via Ferrari <ferrari [at] ferrarilist.com> wrote:
10bhp is what Ferrari claimed was the difference was between the US and Euro spec TR.Felt like 50bhp in reality...If you are rebuilding already...why wouldn't you punch the displacement out a bit for more power??LScentralwines-spirits est 1934625 e street nwwashington, dc 20004
From: Mark <misc [at] 308systems.com>
To: LS <lashdeep [at] yahoo.com>
Cc: 'The FerrariList' <ferrari [at] ferrarilist.com>
Sent: Wednesday, September 3, 2014 1:02 PM
Subject: Re: [Ferrari] Converting a US 308 motor to a Euro 308 motor
Perhaps I am being crass, but the difference is only a claimed 10hp, which probably translates into 3-5hp. Not noticeable. Go for the best engine you can easily find.My .02,MarkFrom: Ferrari [mailto:ferrari-bounces+misc=308systems.com [at] ferrarilist.com] On Behalf Of Matt Boyd
Sent: Wednesday, September 03, 2014 10:59 AM
To: Mark
Cc: The FerrariList
Subject: [Ferrari] Converting a US 308 motor to a Euro 308 motorJust thinking out loud.My car has a Euro 308 motor and I'm glad to have that potential extra power. I need to replace rings in the motor, and as Clyde astutely pointed out, the labor of that type of job is likely to FAR outweigh the cost of getting a replacement long block and dropping it in.It is easier to find a US 308 motor, so if I were to purchase a US motor, what would I have to do to make it a Euro motor? Obviously I have my euro cams already and could drop them in if that's about all it took. How much more involved is this job f converting a US spec motor to Euro spec?-Matt'85 euro 308_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/lashdeep%40yahoo.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/fellippe.galletta%40gmail.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/ferrari308driver%40gmail.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/judge4re%40gmail.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
- Re: Converting a US 308 motor to a Euro 308 motor, (continued)
- Re: Converting a US 308 motor to a Euro 308 motor LS, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Matt Boyd, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor LS, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Matt Boyd, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Erik Nielsen, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Matt Boyd, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor John Ashburne, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Doug & Terri, September 4 2014
- Re: Converting a US 308 motor to a Euro 308 motor Erik Nielsen, September 4 2014
Results generated by Tiger Technologies Web hosting using MHonArc.