Ferrari Mailing List: Re: For the wrench possers you know who you are

[Stephen Sherman (stephensherman44]

Clyde, I know you must be kidding, just 4. open end, box end, slim (thin, example to get at the base of the oil filler tube), cheater tube to extend the wrench, several ratchets ( did you notice even when you buy sockets in a

foreign country - Germany in my case - the sockets are sized for drivers in inches ) drivers, torque wrench. I would ad box cutters for hoses (water, emission and fuel - not to be used on injector fuel lines, use a heat gun,

liquid wrench, wd 40, strap wrench for oil filter and don't forget crescent wrench and pipe wrench (yes I said pipe to be used on parts that are coming out/off and not going back in/on. Vise grips to convince nuts and bolt that gave

up their faces to let go.

Back to the engine pipe and you take the old one off and put it on you newer engine?

I don't know if your Red Head has the heater hose that runs through the rocker panel, if it does, this would be the time to replace it and the brake vacuum is there too. The 3x8 family has them and some swear the car was built around them.

Did I pass?

Stephen    

On Sat, Dec 6, 2014 at 5:01 PM, Clyde Romero <clyderomerof4 [at] bellsouth.net> wrote:

If you want to know why Italy is still a good second world country work on a Ferrari 

Engine is in car

Attaching hoses etc

Heater hose is a bitch to install 

Note to self next time as as engine goes in attach hose

But wait there's more

Same engine same year right!

Fucking hot water pipe on new engine is 5 inches shorter than my engine hence my heater hose will not reach it 

Oh did I mention engine is BOLTED IN CAR AND CHAINS OFF OF IT 

Soooo remove old heater hose assembly from old engine

Easy engine out of car 

Even a wrench posser can do It with supervision (you know who you are )

Did I fail to say it's in the damn car with about as much room to put a 1/4" socket on the bolts as a new girlfriend (read tight)

Get hose assembly's off of engine in car (wew)

Put new old heater hose assembly on engine in car (wrench posser crying )

Done 

Ok Jeopardy Questions 

What 4 wrenches size are needed to work on any Ferrari 

You wrench possers will fail this one big time

Only us true Ferrari Techs will pass this one 

Waiting for answers!!!!!!  

In victory you deserve Champagne

In defeat you need it!

     

Scars are Tattoos with better stories !

If you follow all the rules

You miss all the fun! 

Clyde Romero

Clyderomerof4 [at] bellsouth.net.          

678  6419932

Confidentiality Notice:  This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material.  Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited.

This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged.  If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED.  If you have received this transmission in error, please immediately notify us by reply e-mail at Clyde.romero [at] yahoo.com or  by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/stephensherman44%40gmail.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/