Ferrari Mailing List: Re: RETIREMENT - was GT4 Reverse lights was PCB Fuse Blocks

[Luke Graves (buyer1]

Be careful, retirement isn't all that it's cracked up to be.  I had 2 great careers, loved what I did and worked to age 78.  Then I ran the Hill country FCA tor 2 years.  Engagement in important work that benefits society is very fulfilling. Beats sitting on your ass!

---

From: Ferrari [mailto:ferrari-bounces+buyer1=airmail.net [at] ferrarilist.com] On Behalf Of Peter Rychel
Sent: Saturday, November 19, 2016 2:00 AM
To: Col Luke Graves
Cc: The FerrariList
Subject: Re: [Ferrari] RETIREMENT - was GT4 Reverse lights was PCB Fuse Blocks

This is what I'm looking forward to.

I turned 40 earlier this year.

Realistically, I'm planning to retire @ 60, but I'll try to "pull the pin" sooner than that.

As much as I enjoy what I do, as the years pass, I find it gets in the way in what I really want to do - and that is to play with the Ferrari! Although I realize this whole career thing is what pays to keep that hobby going (and it's been a good, lucrative one)!

I consider myself fortunate though to have gotten into this at an early age (bought the 308 @ age 24 when they were "worthless") and appreciate all the years of joy and sometimes frustration that it provides (even to this day!).

Could be worse...

Okay, back to Rob's electrical gremlins.

Peter

---

From: Ferrari <ferrari-bounces+dino308gt4=hotmail.com [at] ferrarilist.com> on behalf of pbennett [at] Paul-Bennett.com <pbennett [at] Paul-Bennett.com>
Sent: November 17, 2016 10:21 PM
To: PeterGT4
Cc: The FerrariList
Subject: Re: [Ferrari] GT4 Reverse lights was PCB Fuse Blocks

 

A Big thing in retirement is to take every silly little thing as a fun project.  This is a fun part of life which requires using everything you have stuffed into your brain to date to resolve unimportant issues and to get satisfaction and enjoyment from the time spend doing so.  Like your backup light, it’s really no big deal but it can be a fun exercise to make it work they way you want it to.  AND that doesn’t have to be the way the factory or someone else wants it...you will make it work to satisfy your needs and desires.  Carry that attitude throughout each day and ENJOY.

 

From: Robert W. Garven Jr.

Sent: Thursday, November 17, 2016 2:15 PM

To: Paul Bennett

Cc: Paul ; The FerrariList

Subject: Re: [Ferrari] GT4 Reverse lights was PCB Fuse Blocks

 

From what I was told all the original parts were used in the car refurbished or replaced with new old stock parts. the wiring harness was removed taken apart all the wires checked for continuity and then it was reassembled and reinstalled.

there was an awful lot of work done on this car, but just all sorts of little bugs and details that I need to either run down and fix! It took me 25 years to get a car built in Italy to start working perfectly, so it makes sense it would be even harder to get a car that was completely disassembled and put back together again dialed in! I'm also having problems with the tachometer and speedometer jerking wildly and then when the car is running well and warmed up they settle down to be normal? Several people have told me that in a complete restoration it is a last 5% of issues that are the hardest to settle and the most expensive I think that's where I am at.

 

I am retiring in a month so hypothetically but I'm not playing in the band or traveling I can spend most my time trying to fix stuff!! Ha

Sent from my iPhone

On Nov 17, 2016, at 12:44 PM, Peter Rychel <dino308gt4 [at] hotmail.com> wrote:

It's possible they could have used a 308 wiring harness for a U.S. car... My guess. I have severe doubts he would have had someone build each wire and loom it into a harness. Time is money. A LOT easier to buy an OEM NOS harness (I've seen 'em on ebay).

 

If you get a chance Rob, open your glove box door and get a good close-up picture of the fuse boxes, especially the right-hand box and post it here. Paul and the rest of us can take a look and see what wires are hooked up. As he mentioned, the one wire (for the reverse lights) could be misplaced and this will be seen.

 

Peter

---

From: Robert W. Garven Jr. <rgarven [at] gmail.com>
Sent: November 17, 2016 12:30 PM
To: Paul
Cc: dino308gt4 [at] hotmail.com
Subject: Re: [Ferrari] GT4 Reverse lights was PCB Fuse Blocks

 

This was the new 308 GT 41974 European model it was completely disassembled and rebuilt from the ground up for me I thought I would have a car that would be perfect but is turning into a nightmare that's a standard fuse box and relay panel in the picture was taken when or where were rewiring the car

 

I will check with that release handle is for..,

 

Thanks for all your help as you know the electronics is the weakest part of my limited knowledge of cars!

Sent from my iPhone

On Nov 17, 2016, at 12:21 AM, Paul <pbennett [at] macnet.com> wrote:

Nor am I able to make any sense.  Stared at it for 1/2 hour and still cannot place it into much more than a test fixture or engine stand or ??? 
Thoughts --
Front Bonnet at top of photo
Fiberglass cockpit - steering column stub at center left
Gearshift tunnel but no gearshift
Freshly black painted throttle pedal
Pull cable on the right is for a bonnet latch release but on wrong side unless it's for rear bonnet. 
Relay panel legend doesn't match inserted relays
I tried to match the fuse panel wire colors against various cars and it looks generic 308 even 512
Was this photo with another photo(s) which can provide additional clues?
As Arte Johnson used to say ...  "sehr interesting"
paul

I have been so busy not had a chance to even look at the car but just found this 
photo which I can make no sense of….


Robert W. Garven Jr.
rgarven [at] gmail.com mailto:rgarven [at] gmail.com

<igcnifpgfkacjacb.jpg>

---

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/pbennett%40paul-bennett.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/