Ferrari Mailing List: Re: 308 Emergency Brake Adjustment

[Matt Boyd (ferrari308driver]

Hand brake is actually fine, I will JB Blast the pulleys at the rear since I have the rear end up in the air. Thanks!

-matt

On Mon, Jul 9, 2018 at 9:46 PM, W4FEY <nc.w4fey [at] gmail.com> wrote:

Is the hand brake (the part you yank) working properly?  I found I had to clean it out with brake clean, then JB blaster, and then oil.  Like the good old power windows, the thing was filled with old crud and it didn’t matter how I adjusted it.  It wouldn’t engage properly.

Frank's mobile unit 

On Jul 9, 2018, at 9:24 PM, Matt Boyd <ferrari308driver [at] gmail.com> wrote:

rjlloyd on f-chat had a good idea that I'll try on my next attempt. I'll keep the wheel off, tighten the lug bolts on even though the wheel isn't on, then check/adjust clearance.

On Mon, Jul 9, 2018 at 7:36 PM, Matt Boyd <ferrari308driver [at] gmail.com> wrote:

I just posted this on f-chat, but I'm posting it here too to see which forum has a good answer first (competition between f-chat and f-list!). I'll post it on Facebook and see if someone has an idea there first.

Frustrated....

***

Ok, so I've done this job before, and I've done several cam belt services including valve adjustments, so the fact that I'm not having success here is making me very irritable, so I'll vent here in hopes someone can help.

Issue was that the e-brake did next to nothing, and I was replacing tires/doing an oil change, so why not do the adjustment. I have adjusted all four caliper hex thingies such that there is 0.1mm between the pad and the calipers. I've double checked. We're all good.

To reduce confusion, I've completely disconnected the e-brake cable from both calipers.

Now my rear wheels won't turn at all. I have the rear wheels up in the air (jack stands), I put it in reverse, and the wheels do not turn.

Wait, that's not exactly true. If I back off the lug bolts just a tiny bit, one at a time, on the fifth and final loosen, the wheel turns fine. If I have no wheel on and I put the car in neutral, I can turn the wheel disk by hand. But if I put the wheel back on and tighten it (not even to the normal torque setting), I can't even turn the wheel in neutral....until I back off the bolts.

What am I doing wrong? Yes, I have the rear tires in the proper size on the proper wheels.

Thanks for any assistance!

-Matt

'85 Euro 308

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/fty%40employees.org

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/