Re: Fwd: Mission accomplished (oil lines change)
From: Lashdeep Singh (lashdeepyahoo.com)
Date: Fri, 22 May 2020 15:54:54 -0700 (PDT)
Michel, where was your original leak?

What is the part to the right and behind the oil filter housing with the green wires attached?

Oil temp sender?

On May 22, 2020, at 17:38, Michel Savard <mysavard [at] videotron.ca> wrote:



Begin forwarded message:

From: Michel Savard <mysavard [at] videotron.ca>
Subject: Fwd: Mission accomplished (oil lines change)
Date: May 22, 2020 at 5:30:06 PM GMT-4



Begin forwarded message:

From: Michel Savard <mysavard [at] videotron.ca>
Subject: Mission accomplished (oil lines change)
Date: May 22, 2020 at 5:06:47 PM GMT-4

The saga is finally over. I finally put the 2 new oil lines on. The reason it took so long is I waited 39 days to get the 3 new  ‘vibration damping supports’ for the oil cooler from  England. Even with shipping, it was the cheapest place: Superformance. Usually it takes a week but because of the virus…..

But I gave up on the ‘oil pressure sending unit’ just under the oil filter housing. 2 screws out of 3 were just too hard to get for me (see picture).

Michael Savard (1981
<new high oil line.jpeg>
<new low oil line.jpeg>
<oil filter housing.jpeg>
 308 GTSi)


_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/lashdeep%40yahoo.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

Results generated by Tiger Technologies Web hosting using MHonArc.