Ferrari Mailing List: Re: Removing all moulding (behind eats) on 308 GTSi

[Michel Savard (mysavard]

Are you serious ? Through the engine bay!
I didn’t expect that. I’m up to the challenge if that’s the only way.
Michael Savard (1981 308 GTSi)

> On Dec 26, 2020, at 12:17 PM, Brian Keegan <bks281 [at] hotmail.com> wrote:
> 
> The center “joint” has two studs that go through the shelf. You will have to 
> get to them from the engine bay. I hope you’re a contortionist!
> 
> Sent from my iPhone
> 
>> On Dec 26, 2020, at 9:53 AM, Michel Savard <mysavard [at] videotron.ca> 
>> wrote:
>> 
>>  I have a 1981 308 GTSi and I want to redo all the insulation behind the 
>> seats. At a first glance, I can see I need to remove the 2 screws holding 
>> the seat belts. Is there anything else I need to know before I start ?
>> Tav 110 shows # 21 (2 pieces), 23, 25, 20 need to be removed.
>> Happy Holidays!
>> <tav-110.gif>
>> Michael Savard (1981 308 GTSi)
>> _________________________________________________________________
>> To unsubscribe or modify your subscription options, please visit:
>> https://lists.ferrarilist.com/mailman/options/ferrari/bks281%40hotmail.com
>> 
>> Sponsored by BooyahMedia.com
>> and F1 Headlines
>> http://www.F1Headlines.com/
> <tav-110.gif>