Ferrari Mailing List: Re: Removing all moulding (behind eats) on 308 GTSi

[Peter Rychel (dino308gt4]

The headrests for the rear seats in a GT4 are screwed right through the firewall as well – at least easily accessible, right above the front bank of carburetors and below the rear window.

 

Good luck with your project. Are you planning to use Dynamat for the insulation replacement? My friend used it in his Testarossa and he says it made a dramatic difference in cutting down the noise and temps.

 

Peter

 

Sent from Mail for Windows 10

 

 

From: Michel Savard
Sent: December 26, 2020 10:53 AM
To: PeterGT4
Cc: The FerrariList
Subject: Re: [Ferrari] Removing all moulding (behind eats) on 308 GTSi

 

Are you serious ? Through the engine bay!
I didn’t expect that. I’m up to the challenge if that’s the only way.
Michael Savard (1981 308 GTSi)

> On Dec 26, 2020, at 12:17 PM, Brian Keegan <bks281 [at] hotmail.com> wrote:
>
> The center “joint” has two studs that go through the shelf. You will have to get to them from the engine bay. I hope you’re a contortionist!
>
> Sent from my iPhone
>
>> On Dec 26, 2020, at 9:53 AM, Michel Savard <mysavard [at] videotron.ca> wrote:
>>
>>  I have a 1981 308 GTSi and I want to redo all the insulation behind the seats. At a first glance, I can see I need to remove the 2 screws holding the seat belts. Is there anything else I need to know before I start ?
>> Tav 110 shows # 21 (2 pieces), 23, 25, 20 need to be removed.
>> Happy Holidays!
>> <tav-110.gif>
>> Michael Savard (1981 308 GTSi)
>> _________________________________________________________________
>> To unsubscribe or modify your subscription options, please visit:
>> https://lists.ferrarilist.com/mailman/options/ferrari/bks281%40hotmail.com
>>
>> Sponsored by BooyahMedia.com
>> and F1 Headlines
>> http://www.F1Headlines.com/
> <tav-110.gif>

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/dino308gt4%40hotmail.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/