Re: Ferrari AC R12 York Compressor Info needed | <– Date –> <– Thread –> |
From: Douglas Anderson (dnt![]() |
|
Date: Wed, 12 Jan 2022 14:06:49 -0800 (PST) |
Rose does . . . : ) Doug From: Ferrari <ferrari-bounces+dnt=dock.net [at] ferrarilist.com> On Behalf Of Rick Moseley It's a Ferrari Washer & Dryer... YOU don't have a set? On Wednesday, January 12, 2022, 06:17:52 AM PST, Clarence Romero Jr. <clyderomerof4 [at] gmail.com> wrote:
Scars are Tattoos with better stories ! If you have no enemies, you have no character ! Clyde Romero Confidentiality Notice: This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material. Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited. This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify us by reply e-mail at Clyderomerof4 [at] gmail.com or by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.
Peter, Did you remove one of these lower studs? The compressor clu hangs up badly on the farthest right one? Do you have all the studs in the compressor. I am thinking removing them may be harder as I had a real hard time trying to hold and align the compressor and thread the screws in even with a helper? Do you bolt on the support before lifting the compressor in place on the tank. I do that to but only can get it laying on it side. This has never been easy and really having a hard time. I want to take out one of those studs but never had those out before and thinking what could happen if I try…. Rob You are able to remove it from the top? I never could... I always took it out from the bottom (wheel well opening). The gas tank cut out was a convenient table it could rest on while I shimmied my hands underneath that clump of iron (without squishing my fingers in the process). With this procedure, I never spilt a drop of oil as it remains more-or-less upright the whole time. Just cut the fingers off a rubber glove and zip tie (zap strap for us Canucks) them on to the ports. That should keep the oil from leaking out (mostly). Peter Sent from Mail for Windows From: Robert Garven Friends, _________________________________________________________________
_________________________________________________________________ |
- Re: Ferrari AC R12 York Compressor Info needed, (continued)
- Re: Ferrari AC R12 York Compressor Info needed Erik Nielsen, January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Clarence Romero Jr., January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Erik Nielsen, January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Clarence Romero Jr., January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Douglas Anderson, January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Clarence Romero Jr., January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Matt Boyd, January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Rick Moseley, January 12 2022
- Re: Ferrari AC R12 York Compressor Info needed Rick Moseley, January 12 2022
Results generated by Tiger Technologies Web hosting using MHonArc.