Ferrari Mailing List: Re: 308 window trim removal

[BRITT ROTHMAN (britt2asa]

Look in the parts manual to see if it uses plastic pins ( like the 512tr and available at O’Reillys (Dorman brand)) or screws. It may show these as separate part numbers and that will tell you….

Sent from my iPad

On 19 Apr 2024, at 13:21, Matt Boyd <ferrari308driver [at] gmail.com> wrote:



I shouldn't reply because I don't know definitively, but I seem to recall hearing it isn't fastened in and you have to basically pry it out somehow and it is a risky proposition because if you break it you buy it (if you can find a replacement). Please report back what your resolution is as I'd like to know the whole truth.

-Matt

'85 euro 308

On Thu, Apr 18, 2024 at 8:02 PM Dominic Carri <zigzagzoot [at] comcast.net> wrote:

Trying to remove interior trim on GTB 3/4 windows
Cannot see any exposed fasteners
Can barely pry trim piece away on leading edge (towards front) while trailing edge is stuck in there, afraid of breaking it
Anyone done this?

Dominic


_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/ferrari308driver%40gmail.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/britt2asa%40aol.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/