Re: 308 Tech Session (Fredericksburg, VA)
From: Tom Reynolds (kjtarcox.net)
Date: Fri, 20 Mar 2009 19:50:39 -0700 (PDT)
Hey, you could have gone to England...
:)
Tom
----- Original Message ----- 
From: "Rick Lindsay" <rolindsay [at] yahoo.com>
To: <kjtar [at] cox.net>
Cc: "The FerrariList" <ferrari [at] ferrarilist.com>
Sent: Friday, March 20, 2009 3:01 PM
Subject: Re: [Ferrari] 308 Tech Session (Fredericksburg, VA)



You guys always make me want to live in the Mid-Atlantic region.

rick

--- On Fri, 3/20/09, Michael James <cavallino_rapante [at] yahoo.com> wrote:

> From: Michael James <cavallino_rapante [at] yahoo.com>
> Subject: Re: [Ferrari] 308 Tech Session (Fredericksburg, VA)
> To: "rolindsay" <rolindsay [at] yahoo.com>
> Cc: "The FerrariList" <ferrari [at] ferrarilist.com>
> Date: Friday, March 20, 2009, 2:08 PM
> I just did this last spring myself - in my case, it was
> easily a whole-weekend job for two reasons - one, you'll
> want to replace the pulleys with metal-ones with
> ball-bearing axles to greatly reduce friction on the steel
> cable. And two, I found it necessary to soak the
> old-greased fittings overnight so I could brush the crap out
> of the pulley teeth the next morning, wash, dry, re-lube the
> parts, and then practice re-spooling the cables so they
> wind/unwind correctly according to their orientation in the
> door. Plus, if you're installing electricals to
> 'support' the existing motors, that might take some
> time to 'finagle' the connectivity the way you want
> it. On one particularly bad afternoon, I had to un-tangle
> and re-spool a door window cable five times until I got it
> right.
>
> Notice I didn't say anything about re-cutting and
> re-hanging the nylon water-shields behind the leather and
> fiberglass door panels, or the one that's
> 'supposed' to hang inside the door frame itself to
> protect your window motor and your stereo speakers from
> water that runs down the door glass when you wash the
> car....mine were missing. I shoulda made patterns for
> distribution.....oh well.
>
> I know Verell and others claim to do this job in a single
> day - they LIED to me. LOL.
>
> Anywho, I won't be able to come down until at least
> after the 16th of May. But if you push it later, I can
> come down and help.
>
> M
>
> --- On Fri, 3/20/09, Matt Boyd
> <ferrari308driver [at] gmail.com> wrote:
>
>
> From: Matt Boyd <ferrari308driver [at] gmail.com>
> Subject: [Ferrari] 308 Tech Session (Fredericksburg, VA)
> To: "Michael" <Cavallino_Rapante [at] yahoo.com>
> Cc: "The FerrariList"
> <ferrari [at] ferrarilist.com>
> Date: Friday, March 20, 2009, 2:23 PM
>
>
> All,
>
> I posted this on f-chat on both my local sub-group and the
> 308/328
> group and got precisely zero replies. Well, I did get
> replies from
> Lashdeep, Scott Carpenter, and George Parker, but I had
> told them all
> about the idea prior to posting it on f-chat.
>
> Any interest from f-list? If not, I'll just do this job
> in my driveway.
>
> -matt
>
> ********************
> All,
>
> I plan to host a technical session in the next month or two
> or so.
> Topic is going to focus on window motors/mechanism. I have
> done this
> on my car before but it is slow again, so I intend to take
> one (or
> both) windows and assemblies out, clean the gunk out, put
> in new
> grease, get everything lined up properly (this is my
> present worst
> problem), and I also have bought the window accelerators
> from Ricambi
> and will put these in.
>
> Time permitting, I will investigate the power lock problems
> I have by
> starting with taking out the passenger door locking
> mechanism (I need
> to study this more to make sure I know what I'm getting
> into) and
> cleaning grease out of that, too.
>
> Probably won't get to it, but I also have Birdman's
> fuseblocks to install.
>
> Perhaps you might want to do the same on the same day, or
> maybe you
> just want to observe so you can decide if you want to do it
> on your
> own. Or maybe you just want to come hang out.
>
> I plan to host this at the Classic Car Center in
> Fredericksburg, VA
> (http://www.classiccarcenter.net/). The Classic Car Center
> is a
> storage facility for classic cars, and they also service
> classic cars.
> Always a nice variety of cars on consignment and in active
> storage. It
> is located just a couple miles off I95 midway between DC
> and Richmond.
> They have graciously volunteered to help by hosting this
> event!
>
> Plan for the day would be a fairly early start with coffee
> and donuts.
> Work until lunch, then go for a nice backroad drive and
> lunch (and ice
> cream at Carl's). Follow up with the afternoon
> continuing/finishing
> work.
>
> The event will take place on a Saturday, on either 4 April,
> 11 April,
> 25 April, or 16 May. Should I rule out any of these dates
> that should
> be ruled out due to already scheduled FCA or other events?
>
> Who would be interested? I just planned to do this myself
> in the
> garage, but thought others might be interested in joining
> in.
>
> -Matt
> '85 Euro 308 GTS/QV
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please
> visit:
>
http://lists.ferrarilist.com/mailman/options/ferrari/cavallino_rapante%40yahoo.com
>
> Sponsored by BooyahMedia.com
> and F1 Headlines
> http://www.F1Headlines.com/
>
>
>
>
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please
> visit:
> http://lists.ferrarilist.com/mailman/options/ferrari/rolindsay%40yahoo.com
>
> Sponsored by BooyahMedia.com
> and F1 Headlines
> http://www.F1Headlines.com/
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/kjtar%40cox.net

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/


-- 
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.18.8/714 - Release Date: 3/8/07


Results generated by Tiger Technologies Web hosting using MHonArc.