Re: Engine Rebuild III | <– Date –> <– Thread –> |
From: wade (wade![]() |
|
Date: Fri, 27 Nov 2009 06:38:30 -0800 (PST) |
If you need it I have a 2v block that is perfect Wade Sent on the Sprint® Now Network from my BlackBerry® -----Original Message----- From: "philville dejazzd.com" <philville [at] dejazzd.com> Date: Fri, 27 Nov 2009 09:33:40 To: Wade<wade [at] fortunemotors.com> Cc: The FerrariList<ferrari [at] ferrarilist.com> Subject: Re: [Ferrari] Engine Rebuild III Michael I think it might make sense to listen to what Ken said "it might be cheaper", maybe (just maybe) some one on the list has a car that they wish to or even worse need to sell. I do not know what the condition of your present car is ( other than the engine ) but I do know that some one on this list has a euro mondial 3.2 that probably has a strong motor.....hmmm I wonder ......?? Phil ----- Original Message ----- From: Ken Rentiers <rentiers [at] me.com> Date: Friday, November 27, 2009 12:21 am Subject: Re: [Ferrari] Engine Rebuild III To: Phil Tegtmeier <philville [at] dejazzd.com> Cc: The FerrariList <ferrari [at] ferrarilist.com> > Cheaper to buy another 308 than buy all those parts. > > Sent from my iPhone > > On Nov 26, 2009, at 9:15 PM, clyderomero [at] worldnet.att.net wrote: > > > Buy a short block > > That shit is toast > > You will be throwing good money plus many hours down the drain > > > > Clyde > > Sent via BlackBerry by AT&T > > > > -----Original Message----- > > From: Martin Stark <MStark [at] Copper.net> > > Date: Thu, 26 Nov 2009 21:57:17 > > To: clyde<clyderomero [at] worldnet.att.net> > > Cc: The FerrariList<ferrari [at] ferrarilist.com> > > Subject: Re: [Ferrari] Engine Rebuild III > > > > Which oil did you use? > > > > Michael James wrote: > > > >> My mechanic, David Feinberg, believes my choice in oil > coupled with > >> the heat did some serious damage - the piston rings scoured the > >> cylinder liners, and vice-versa when the oil 'broke-down" from > >> high-heat, and the bearings in the motor are all SHOT. > The Cams and > >> Crankshaft were spared, but the bearing sets have risen in > price over > >> the years....and so have cylinder liners. I also burned- > through a > >> piston. I also have all of the engine gaskets to > replace (a whole- > >> set > >> of engine gaskets are $1,800, which include the head > gaskets). All > >> 16 > >> exhaust valves are destroyed, along with 9 intake valves.....the > >> previous valve job managed to 'nick' all of the valves and corrupt > >> their sealing properties, so my compression/leakdown numbers were > >> horrible across the board. I suppose I should be lucky > that the > >> Block > >> and Heads were spared, but the internal 'bits' that have been > roasted>> over the years....crap! > >> > >> Anywho, we'll have to sit-down and review what the way-ahead > looks > >> like. > >> > >> M > >> > >> <snip> > >> > > _________________________________________________________________ > > To unsubscribe or modify your subscription options, please visit: > > > http://lists.ferrarilist.com/mailman/options/ferrari/clyderomero%40wor ldnet.att.net> > > Sponsored by BooyahMedia.com > > and F1 Headlines > > http://www.F1Headlines.com/ > > _________________________________________________________________ > > To unsubscribe or modify your subscription options, please visit: > > > http://lists.ferrarilist.com/mailman/options/ferrari/rentiers%40mail.c om> > > Sponsored by BooyahMedia.com > > and F1 Headlines > > http://www.F1Headlines.com/ > > > _________________________________________________________________ > To unsubscribe or modify your subscription options, please visit: > http://lists.ferrarilist.com/mailman/options/ferrari/philville%40dejaz zd.com > > Sponsored by BooyahMedia.com > and F1 Headlines > http://www.F1Headlines.com/ Please read on................. The Concours d"Elegance at Radnor Hunt Please take a minute and go to: www.radnorconcours.org AND OF COURSE, go to: .........www.PhilvilleUSA.com
- Re: Engine Rebuild III, (continued)
- Re: Engine Rebuild III Martin Stark, November 26 2009
- Re: Engine Rebuild III clyderomero, November 26 2009
- Re: Engine Rebuild III Ken Rentiers, November 26 2009
- Re: Engine Rebuild III philville dejazzd.com, November 27 2009
- Re: Engine Rebuild III wade, November 27 2009
- Re: Engine Rebuild III Matt Boyd, November 27 2009
- Re: Engine Rebuild III Michael James, November 30 2009
- Re: Engine Rebuild III Robert W. Garven Jr., November 30 2009
- Re: Engine Rebuild III Michael James, November 30 2009
Results generated by Tiger Technologies Web hosting using MHonArc.