Ferrari Mailing List: Re: HELP! How to replace 308 headlamps

[Pat Scopelliti (pscopell]

Yes, I did raise the lamps, then removed the battery cable leaving the lamps up.  I removed the top cover (noted that the left one has a big “R” written on the bottom, while the right has a big “L” – ahem).

 

You would think it would be easy… but the only screws accessible from the front are the two alignment screws.  There are the usual screws holding the headlamp bezel against the headlamp, but there is no access to them.  Am I missing something?  Is it a Euro model thing?  This is an early steel 308, maybe they changed the assembly?

 

Pat

 

Pat Scopelliti

pscopell [at] stny.rr.com

 

-----Original Message-----
From: Michael James [mailto:cavallino_rapante [at] yahoo.com]
Sent: Monday, September 05, 2011 6:03 PM
To: Pat Scopelliti
Cc: The FerrariList
Subject: Re: [Ferrari] HELP! How to replace 308 headlamps

 

I recall starting the car, turning the headlights 'on', then shutting-off the car to keep the headlights in the 'up' position.  You could use the manual knob under the fender grills, but starting the car was easier.

 

The four screws in the front edges of the headlamp adjusted windage and elevation of the headlight - you will need to align the new beam when you're done.  Once the light is 'up', change-out is much easier.

 

M

 

 

From: Pat Scopelliti <pscopell [at] stny.rr.com>
To: Michael <Cavallino_Rapante [at] yahoo.com>
Cc: The FerrariList <ferrari [at] ferrarilist.com>
Sent: Monday, September 5, 2011 5:52 PM
Subject: [Ferrari] HELP! How to replace 308 headlamps

OK, I’m stumped.  I’ve got a nice relay kit for my308’s headlamps.  Seems to work fine.

 

I also bought new Hella headlamps, but for the life of me can’t figure out how to replace them.  It looks there is a heavy bracket holding the headlamp that is attached to the whole assembly by four screws that are blocked by the fender, which makes me think I have to remove the two pivot bolts for the headlamp assembly.  Looks like I have to remove the fender to get to those bolts loose.

 

There are also three bolts on the back of the headlamp assembly.  I’m going to try loosening those to see if that releases the lamp.

 

Any help would be appreciated.

 

Pat

 

Pat Scopelliti

pscopell [at] stny.rr.com

 

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/cavallino_rapante%40yahoo.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/