Re: Blinky lights | <– Date –> <– Thread –> |
From: Grahame Reinthal (grahame![]() |
|
Date: Wed, 13 Jun 2012 22:20:36 -0700 (PDT) |
Well, changing the relays, checking all
the fuses and cleaning up all those connections did not fix the problem, but
now I have a few spare relays! ;-) I was getting quite confused with what was
going on, because it seemed somewhat random and did not seem to exactly fit
with what I have read in the FChat archives and so on. Anyway, frustrated, I popped in to see
Russ (a great Ferrari technician) who in less than a minute had isolated the likely
problem. As we twisted the light switch at the end of the stalk through its
normal 90 degrees, connection was being made and then lost, with lights popping
up then down. Five minutes later, with the switch pulled
apart, we could see the problem - a little green earth wire had broken loose so
that it was only making passing connection as the switch was twisted. So, a bit
of solder, a little bit of a clean-up of connections while in there and it all
works perfectly now. Success!! Cheers, Grahame |
- Re: Blinky lights, (continued)
- Re: Blinky lights Doug and Terri Anderson, June 10 2012
- Re: Blinky lights cjromero, June 10 2012
- Re: Blinky lights Grahame Reinthal, June 10 2012
- Re: Blinky lights cjromero, June 10 2012
- Re: Blinky lights Grahame Reinthal, June 13 2012
- Re: Blinky lights Matt Boyd, June 14 2012
- Re: Blinky lights Robert W. Garven Jr., July 30 2012
- Re: Blinky lights Doug and Terri Anderson, June 14 2012
Results generated by Tiger Technologies Web hosting using MHonArc.