Re: How Many Crush Washers for 512 TR Coolant Flush | <– Date –> <– Thread –> |
From: Steve Jenkins (steve![]() |
|
Date: Tue, 26 Aug 2014 11:46:26 -0700 (PDT) |
On Tue, Aug 26, 2014 at 11:44 AM, Steve Jenkins <steve [at] stevejenkins.com> wrote:
On Tue, Aug 26, 2014 at 11:37 AM, Clyde Romero <clyderomerof4 [at] bellsouth.net> wrote:
I use PrestoneDilute 50/50 ?If you can jack the car up from behind when refilling the system and open the 2 bleed screws until you get a steady stream of water coming outWill do.Leave the coolant recovery tank cap offCrank carLet it get hot around 195 or soHave water ready to add to tankWhen steady stream comes out hot lightly close screwsAnd top offSystem is good to go when fans come onIf fans dint come on bleed system until they doYep - that's how I remember that part. :)
Also... will I need 2 gallons BEFORE dilution (so four gallons of diluted)? Or two gallons diluted liquid to fill with?
SteveJ
- Re: How Many Crush Washers for 512 TR Coolant Flush, (continued)
-
Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Clyde Romero, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Matt Boyd, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush Matt Boyd, August 26 2014
- Re: How Many Crush Washers for 512 TR Coolant Flush John Ashburne, August 26 2014
-
Re: How Many Crush Washers for 512 TR Coolant Flush Steve Jenkins, August 26 2014
Results generated by Tiger Technologies Web hosting using MHonArc.