Re: How Many Crush Washers for 512 TR Coolant Flush
From: Clyde Romero (clyderomerof4bellsouth.net)
Date: Tue, 26 Aug 2014 11:56:18 -0700 (PDT)
Yes just use 2 gallons of the stuff and top it all off with water 
That does it fine
Just watch the temp when you crank it up
Because you don't want to over heat the car
If the needle goes to around 210 or so shut it down and top off the water in the tank and bleed it really good 
Trapped air causes no fans!
Call me if you have questions
How many miles on the car now?
What came of the F 40 gig?




In victory you deserve Champagne
In defeat you need it!

     

Scars are Tattoos with better stories !

If you follow all the rules
You miss all the fun! 

Clyde Romero
678  6419932

Confidentiality Notice:  This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material.  Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited.
This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged.  If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED.  If you have received this transmission in error, please immediately notify us by reply e-mail at Clyde.romero [at] yahoo.com or  by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.

On Aug 26, 2014, at 2:44 PM, Steve Jenkins <steve [at] stevejenkins.com> wrote:

On Tue, Aug 26, 2014 at 11:37 AM, Clyde Romero <clyderomerof4 [at] bellsouth.net> wrote:
I use Prestone 

Dilute 50/50 ?
 
If you can jack the car up from behind when refilling the system and open the 2 bleed screws until you get a steady stream of water coming out 

Will do.
 
Leave the coolant recovery tank cap off 
Crank car 
Let it get hot around 195 or so 
Have water ready to add to tank
When steady stream comes out hot lightly close screws
And top off
System is good to go when fans come on
If fans dint come on bleed system until they do

Yep - that's how I remember that part. :)

Thanks!

SteveJ
 

Results generated by Tiger Technologies Web hosting using MHonArc.