Re: 328 Window Relay Mod | <– Date –> <– Thread –> |
From: francis newman (francis![]() |
|
Date: Wed, 15 Oct 2014 10:17:49 -0700 (PDT) |
Hi Steve Haven't done the window relay mod though I have done it for the cooling fans and headlights on my GT4. .My windows are OKish and not a priority at the moment One thing to watch though. It may not just be lack of current to the motor that is the problem. Make sure you have cleaned out any old hardened grease from the gears on the winder motor first. If you get full current to a motor that is basically working against old grease you are likely to burn it out. DK Engineering over here in UK told me that there are replacement motors they had fitted on a 288GTO and they work brilliantly. However at nearly 500 bucks a go that is not a route I intend to take! Good luck Francis On 13 Oct 2014, at 15:32, Steve Jenkins wrote: > Anyone done the window relay mod to a 328? Slightly different than the > well-documented 308 procedure, since current for the passenger window goea > through second switch on driver's side. > > Thx! > > SteveJ > > _________________________________________________________________ > To unsubscribe or modify your subscription options, please visit: > http://lists.ferrarilist.com/mailman/options/ferrari/francis.newman%40fntn.co.uk > > Sponsored by BooyahMedia.com > and F1 Headlines > http://www.F1Headlines.com/
-
328 Window Relay Mod Steve Jenkins, October 13 2014
- Re: 328 Window Relay Mod francis newman, October 15 2014
Results generated by Tiger Technologies Web hosting using MHonArc.