Ferrari Mailing List: Re: Oil temperature gauge not working (1981 308 GTSi)

[Peter Rychel (dino308gt4]

It’s definitely the connection for the temp sending unit is not connected (considering the engine mounts were replaced, it would be easy for that to come undone).

 

The sending unit is located beside where the shift selector enters the front of the oil pan case.

 

Peter

 

Sent from Mail for Windows 10

 

 

---

From: Ferrari <ferrari-bounces+dino308gt4=hotmail.com [at] ferrarilist.com> on behalf of Lashdeep Singh via Ferrari <ferrari [at] ferrarilist.com>
Sent: Saturday, September 29, 2018 7:41:34 PM
To: PeterGT4
Cc: The FerrariList
Subject: Re: [Ferrari] Oil temperature gauge not working (1981 308 GTSi)

 

Or the sending unit connector. Prob at the oil pan...

On Sep 29, 2018, at 20:38, Clarence Romero Jr. <clyderomerof4 [at] gmail.com> wrote:

Check the ground

     RF4-4EVR

Scars are Tattoos with better stories !

If you have no enemies, you have no character !

Clyde Romero    

Confidentiality Notice:  This e-mail ( including attachments ) is covered by the Electronic Communications Privacy Act, 18 U. S. C., Sections 2510-2521, and is intended only for the persons or entity to which it is addressed, and may contain confidential or privileged material.  Any unauthorized review, use, disclosure, dissemination, copying, forwarding or distribution is prohibited.

This email transmission, and any documents, files or previous email messages attached to it, may contain confidential information that is priviledged.  If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the information containes in or attached to this message is STRICTLY PROHIBITED.  If you have received this transmission in error, please immediately notify us by reply e-mail at Clyde.romerof4 [at] gmail.com or  by telephone at (678 6419932)and destroy the original transmission and its attachments without reading them or saving them to disk.

On Sep 29, 2018, at 6:52 PM, Michel Savard <mysavard [at] videotron.ca> wrote:

My mechanic changed all 4 engine supports this week. That’s after changing all bushings last week. Expensive september. Oye!
Got the car earlier today and once on the highway, I noticed the hand on the oil temperature gauge had not moved at all. Drove for 40 minutes like that. Oil pressure was good (90-95). Water temp was good too.

Could the mechanic had touched something underneath ? What should I check before bringing it back to my mechanic ?
Never had a gauge fail on me before in 17 years. Except gas gauge.

Michael Savard (1981 308 GTSi)
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/clyderomerof4%40gmail.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/lashdeep%40yahoo.com

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/