Re: Robs Clutch Adventure Part II
From: Hans E. Hansen (FListhanshansen.org)
Date: Fri, 18 Jan 2019 14:49:58 -0800 (PST)
I'll tell you what NOT to use......

In my departed GT4 someone had used the lead paste anti seize. It
eventually gummed up, gluing the clutch disk to the spline and not
letting it slide away from the flywheel.  Caused me to have a
premature clutch job, as the disk was not wore that much.

Not sure.  Maybe a light coat of a moly disulphide lube?  K-Y jelly?

Hans.

On Fri, Jan 18, 2019 at 2:44 PM Robert Garven <rgarven [at] gmail.com> wrote:
>
> Friends,
>
> I’m putting my bell housing on and I just wanted to make sure what type of 
> grease if any
> That you put on the splined shaft that goes into the pilot bearing and clutch 
> disk?
> I don’t want any grease to be flying up onto the clutch disk!
>
> Thank you for any suggestions or warnings!
>
> Rob
>
> _________________________________________________________________
> To unsubscribe or modify your subscription options, please visit:
> https://lists.ferrarilist.com/mailman/options/ferrari/flist%40hanshansen.org
>
> Sponsored by BooyahMedia.com
> and F1 Headlines
> http://www.F1Headlines.com/

Results generated by Tiger Technologies Web hosting using MHonArc.