Ferrari Mailing List: Re: Robs Clutch Adventure Part II

[Robert Garven (rgarven]

All,

I was going to use the redline CV grease on the TO bearing and shaft 

but wondering if that is to thin a grease also?????

Rob

On Jan 18, 2019, at 2:49 PM, Hans E. Hansen <FList [at] hanshansen.org> wrote:

I'll tell you what NOT to use......

In my departed GT4 someone had used the lead paste anti seize. It
eventually gummed up, gluing the clutch disk to the spline and not
letting it slide away from the flywheel.  Caused me to have a
premature clutch job, as the disk was not wore that much.

Not sure.  Maybe a light coat of a moly disulphide lube?  K-Y jelly?

Hans.

On Fri, Jan 18, 2019 at 2:44 PM Robert Garven <rgarven [at] gmail.com> wrote:

Friends,

I’m putting my bell housing on and I just wanted to make sure what type of grease if any
That you put on the splined shaft that goes into the pilot bearing and clutch disk?
I don’t want any grease to be flying up onto the clutch disk!

Thank you for any suggestions or warnings!

Rob

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/flist%40hanshansen.org

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/