Probable explanation for my horn problem! | <– Date –> <– Thread –> |
From: Michel Savard (mysavard![]() |
|
Date: Mon, 3 Jun 2024 15:36:16 -0700 (PDT) |
Today, I decided to check the fuses. I tested a couple of relays (0332019151) yesterday and all were good. In april 2023 I put the Birdman’s fuse boxes in. I just noticed the #16 (horn) was quite loose. It was easy to push it up and down. Still a bit tough to take it out but can this have been the problem ? #17 (right fan) was quite loose too. Both fan worked yesterday by the sound of it, I didn’t check if BOTH worked. If this was the origine of my problem, meaning horn not working only when engine running, how do you get these things tight ? I tried with my thumb finger nails, but to no results. I couldn’t find a tiny enough screwdriver blade. Any ideas ? If that was the problem, now I only need to figure out the mess I made with the ground wire attached to the horn button. Michael Savard (1981 308 GTSi)
-
Probable explanation for my horn problem! Michel Savard, June 3 2024
-
Re: Probable explanation for my horn problem! Peter Rychel, June 3 2024
-
Re: Probable explanation for my horn problem! Michel Savard, June 4 2024
- Re: Probable explanation for my horn problem! Peter Rychel, June 4 2024
- Re: Probable explanation for my horn problem! misc, June 5 2024
-
Re: Probable explanation for my horn problem! Michel Savard, June 4 2024
-
Re: Probable explanation for my horn problem! Peter Rychel, June 3 2024
Results generated by Tiger Technologies Web hosting using MHonArc.