Re: Francis's 308GT4 | <– Date –> <– Thread –> |
From: Rick Lindsay (richardolindsay![]() |
|
Date: Fri, 13 Jun 2014 11:52:35 -0700 (PDT) |
Oh, absolutely. My 308GTB has 3-5/8" road clearance under the front (deep) spoiler at a line connecting the front axles (lowest point). Driveways are challenging and speed bumps are just abominations (with or without adequate clearance). And it doesn't help that the nose is cantilevered out so far. My biggest risk is pulling into a driveway a little too near the edge where the kerb starts to rise. I've only nicked one spoiler that way but doing so produced a string of expletives that would make a sailor blush!
-------- Original message --------
From: "Robert W. Garven Jr."
Date:06/13/2014 10:04 AM (GMT-06:00)
To: Rick Lindsay
Cc: The FerrariList
Subject: Re: [Ferrari] Francis's 308GT4
All,
my car is factory height checked my springs and is still so low it will bottom out in the middle in a slight driveway apex.......
Robert W. Garven Jr.
rgarven [at] gmail.com
"The Ferrari is a dream - people dream of owning this special vehicle and for most people it will remain a dream apart from for those lucky few." Enzo Ferrari
On Jun 12, 2014, at 6:57 AM, Rick Lindsay <richardolindsay [at] gmail.com> wrote:
Hi Francis, et al.,
Warning: Opinions follow...
1. Well done on the re-jetting back to factory spec.. I'm always fascinated by previous owners who consider themselves more clever than professional engineers! That said, everything in a car is a trade-off. My guess is that your PO wanted a tiny bit more high speed grunt at the expense of drivability (slow running).
2. I definitely would restore the ride height to factory spec.. Same argument. Ride should be a little softer too without sacrificing handling or road-holding.
Well done on your ongoing restoration! Its an incredibly rewarding hobby, isn't it?!
-rick
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/rgarven%40gmail.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
Such fun...
-rick
-------- Original message --------
From: "Robert W. Garven Jr."
Date:06/13/2014 10:04 AM (GMT-06:00)
To: Rick Lindsay
Cc: The FerrariList
Subject: Re: [Ferrari] Francis's 308GT4
All,
my car is factory height checked my springs and is still so low it will bottom out in the middle in a slight driveway apex.......
Robert W. Garven Jr.
rgarven [at] gmail.com
"The Ferrari is a dream - people dream of owning this special vehicle and for most people it will remain a dream apart from for those lucky few." Enzo Ferrari
On Jun 12, 2014, at 6:57 AM, Rick Lindsay <richardolindsay [at] gmail.com> wrote:
Hi Francis, et al.,
Warning: Opinions follow...
1. Well done on the re-jetting back to factory spec.. I'm always fascinated by previous owners who consider themselves more clever than professional engineers! That said, everything in a car is a trade-off. My guess is that your PO wanted a tiny bit more high speed grunt at the expense of drivability (slow running).
2. I definitely would restore the ride height to factory spec.. Same argument. Ride should be a little softer too without sacrificing handling or road-holding.
Well done on your ongoing restoration! Its an incredibly rewarding hobby, isn't it?!
-rick
_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
http://lists.ferrarilist.com/mailman/options/ferrari/rgarven%40gmail.com
Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/
-
Francis's 308GT4 Rick Lindsay, June 12 2014
-
Re: Francis's 308GT4 Robert W. Garven Jr., June 13 2014
-
Re: Francis's 308GT4 francis newman, June 15 2014
- Re: Francis's 308GT4 Robert W. Garven Jr., June 15 2014
-
Re: Francis's 308GT4 francis newman, June 15 2014
- Re: Francis's 308GT4 Rick Lindsay, June 13 2014
- Re: Francis's 308GT4 LS, June 13 2014
- Re: Francis's 308GT4 Doug & Terri, June 13 2014
-
Re: Francis's 308GT4 Doug & Terri, June 13 2014
- Re: Francis's 308GT4 John Ashburne, June 13 2014
-
Re: Francis's 308GT4 Robert W. Garven Jr., June 13 2014
Results generated by Tiger Technologies Web hosting using MHonArc.