Ferrari Mailing List: Re: Change of oil line failed: Mission aborted

[Martin Stark (mstark]

You might try a good quality flare nut wrench if you can find one in that size.  Impact works wonders so give the wrench a good rap with a lead mallet

What material is the threaded piece coming off the oil cooler?  If it's AL then heating the nut may not help much.

On 4/1/2020 1:24 PM, Michel Savard wrote:

Well the torching of the nut didn’t work at all. I applied as much force as I could. I weight 180 lbs. Torched it 4-5 times. Looking at it, see picture again, I can ONLY heat 1 side of the nut. Can’t go under it, can’t go the other side either, nor  can I heat on top of the nut. I can only apply heat on 1 side. So, maybe that’s why the heating solution didn’t work at all.

I guess I’ll have to send it to my mechanic after the lockdown is finished.

That’s racing!

Michael Savard (1981 GTSi)

_________________________________________________________________
To unsubscribe or modify your subscription options, please visit:
https://lists.ferrarilist.com/mailman/options/ferrari/mstark%40copper.net

Sponsored by BooyahMedia.com
and F1 Headlines
http://www.F1Headlines.com/