Re: <NFC>removing broken screw question | <– Date –> <– Thread –> |
From: Rick Lindsay (rolindsay![]() |
|
Date: Mon, 12 Jan 2009 18:35:50 -0800 (PST) |
LOL! If you want a real treat, try removing a broken off tap! rick --- On Mon, 1/12/09, E M <pokiebaron [at] gmail.com> wrote: > From: E M <pokiebaron [at] gmail.com> > Subject: Re: [Ferrari] <NFC>removing broken screw question > To: "rolindsay" <rolindsay [at] yahoo.com> > Cc: "The FerrariList" <ferrari [at] ferrarilist.com> > Date: Monday, January 12, 2009, 8:25 PM > Have you ever tried to do that? lol. When I tried it once, > I did a great > job of walking the drill bit all over the place. I amaze > myself how I can > so often turn a small project into a major one. lol > > Ed > 911SC > > 2009/1/12 Misc <misc [at] 308systems.com> > > > Drill a VERY small hole, then use an appropriately > sized small Easyout tool > > to un-thread it. > > > > Mark Lueker > > 308 SYSTEMS Inc. > > 970-282-7006 > > www.308systems.com > > > > -----Original Message----- > > From: Lee S. Lingo [mailto:lslingo [at] comcast.net] > > Sent: Monday, January 12, 2009 2:24 PM > > To: Mark > > Cc: The FerrariList > > Subject: [Ferrari] <NFC>removing broken screw > question > > > > > > In my effort to replace a burned out bulb in my > taillight, a screw broke in > > two. They have grown rusty and are rather narrow so > it was no surprise. > > I'm able to take the top off the clam-shell and > have access to the top of > > the remainder of the screw, but I'm not sure how > to remove the tip. > > There's > > not enough exposed to grab with needle-nose pliers. > Any suggestions? > > > > > > > > Lee > > > > > _________________________________________________________________ > > To unsubscribe or modify your subscription options, > please visit: > > > http://lists.ferrarilist.com/mailman/options/ferrari/misc%40308systems.com > > > > Sponsored by BooyahMedia.com > > and F1 Headlines > > http://www.F1Headlines.com/ > > > > > > > _________________________________________________________________ > > To unsubscribe or modify your subscription options, > please visit: > > > http://lists.ferrarilist.com/mailman/options/ferrari/pokiebaron%40gmail.com > > > > Sponsored by BooyahMedia.com > > and F1 Headlines > > http://www.F1Headlines.com/ > > > _________________________________________________________________ > To unsubscribe or modify your subscription options, please > visit: > http://lists.ferrarilist.com/mailman/options/ferrari/rolindsay%40yahoo.com > > Sponsored by BooyahMedia.com > and F1 Headlines > http://www.F1Headlines.com/
- Re: <NFC>removing broken screw question, (continued)
- Re: <NFC>removing broken screw question LarryT, January 12 2009
- Re: <NFC>removing broken screw question clyde romero, January 12 2009
-
Re: <NFC>removing broken screw question Misc, January 12 2009
-
Re: <NFC>removing broken screw question E M, January 12 2009
- Re: <NFC>removing broken screw question Rick Lindsay, January 12 2009
- Re: <NFC>removing broken screw question Jeff Greenfield, January 12 2009
- Re: <NFC>removing broken screw question Jim Conforti, January 12 2009
- Re: <NFC>removing broken screw question Stephen Sherman, January 12 2009
-
Re: <NFC>removing broken screw question E M, January 12 2009
- Re: <NFC>removing broken screw question Mike Fleischer, January 12 2009
Results generated by Tiger Technologies Web hosting using MHonArc.