Re: <NFC>removing broken screw question | <– Date –> <– Thread –> |
From: Stephen Sherman (sherman![]() |
|
Date: Mon, 12 Jan 2009 19:45:04 -0800 (PST) |
If your are able to reach it with a drill, first having soaked it with
liquid wrench (being careful to not get any on he lense. put an eraser in a
reverable drill ( if you don't have 1/4" rubber eraser - then break one off
a pencil) and use that as a 'easy out'. If that does not work use a quarter
inch dowel b4 you try a drill. It is hard to drill freehand into a steel
screw.
StephenPS Try boh directions with the drill, like getting a car unstuck in the snow. ----- Original Message ----- From: "E M" <pokiebaron [at] gmail.com>
To: "Stephen" <sherman [at] wildblue.net> Cc: "The FerrariList" <ferrari [at] ferrarilist.com> Sent: Monday, January 12, 2009 8:25 PM Subject: Re: [Ferrari] <NFC>removing broken screw question
Have you ever tried to do that? lol. When I tried it once, I did a great job of walking the drill bit all over the place. I amaze myself how I can so often turn a small project into a major one. lol Ed 911SC 2009/1/12 Misc <misc [at] 308systems.com>Drill a VERY small hole, then use an appropriately sized small Easyout toolto un-thread it. Mark Lueker 308 SYSTEMS Inc. 970-282-7006 www.308systems.com -----Original Message----- From: Lee S. Lingo [mailto:lslingo [at] comcast.net] Sent: Monday, January 12, 2009 2:24 PM To: Mark Cc: The FerrariList Subject: [Ferrari] <NFC>removing broken screw questionIn my effort to replace a burned out bulb in my taillight, a screw broke intwo. They have grown rusty and are rather narrow so it was no surprise. I'm able to take the top off the clam-shell and have access to the top of the remainder of the screw, but I'm not sure how to remove the tip. There's not enough exposed to grab with needle-nose pliers. Any suggestions? Lee _________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/misc%40308systems.com Sponsored by BooyahMedia.com and F1 Headlines http://www.F1Headlines.com/ _________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/pokiebaron%40gmail.com Sponsored by BooyahMedia.com and F1 Headlines http://www.F1Headlines.com/_________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/sherman%40wildblue.net Sponsored by BooyahMedia.com and F1 Headlineshttp://www.F1Headlines.com/
- Re: <NFC>removing broken screw question, (continued)
-
Re: <NFC>removing broken screw question E M, January 12 2009
- Re: <NFC>removing broken screw question Rick Lindsay, January 12 2009
- Re: <NFC>removing broken screw question Jeff Greenfield, January 12 2009
- Re: <NFC>removing broken screw question Jim Conforti, January 12 2009
- Re: <NFC>removing broken screw question Stephen Sherman, January 12 2009
-
Re: <NFC>removing broken screw question E M, January 12 2009
-
Re: <NFC>removing broken screw question clyderomero, January 13 2009
- Re: <NFC>removing broken screw question Martin Stark, January 13 2009
Results generated by Tiger Technologies Web hosting using MHonArc.