Re: ferrari infringement ebay | <– Date –> <– Thread –> |
From: Doug and Terri Anderson (dnt![]() |
|
Date: Mon, 25 Jun 2007 06:39:29 -0700 (PDT) |
In the 1990's when Terri and I got our 1978 308GTS, I made it a point to
find the parts manual and the workshop manual.
I eventually collected every parts manual there was from 75 onward - up to the last paper manual - a 5# yellow 4 ring binder for the 2001 360challenge. I still have extras but they are collectors items still in factory plastic. Some 355s and so forth.
Alas, the 308gt4 WS manual was cute but no help to me, an occasional week end do it yourselfer. BUT the parts manual was great. Very nice drawings of all the parts and where they went. Grays Anatomy of our car.
Then I ran into others 308 owners with my original problem - have the car - don't have a parts book. So I set off copying just the picture plates - the description of parts was worthless - all in Italian and a "screw" was the same for the thing that held the clock in or bolted the head onto the block.
Yes, I was scared to death of the phone call in night from Italian speaking attorneys from New Jersey but was never bothered by one tho many people stated get ready. Then along came the CD and the paper business was not needed.
I don't make them anymore I still have a box of some copies that I sell for postage only - just to help out the poor soul who has the car and needs to figure out what goes where or order parts. The CD is great but hard to fold up and take with you. heh heh
----- Original Message ----- From: "Misc" <misc [at] 308systems.com>
To: "DOUG" <dnt [at] dock.net>
Cc: "The FerrariList" <ferrari [at] ferrarilist.com>
Sent: Sunday, June 24, 2007 4:13 PM
Subject: Re: [Ferrari] ferrari infringement ebay
I eventually collected every parts manual there was from 75 onward - up to the last paper manual - a 5# yellow 4 ring binder for the 2001 360challenge. I still have extras but they are collectors items still in factory plastic. Some 355s and so forth.
Alas, the 308gt4 WS manual was cute but no help to me, an occasional week end do it yourselfer. BUT the parts manual was great. Very nice drawings of all the parts and where they went. Grays Anatomy of our car.
Then I ran into others 308 owners with my original problem - have the car - don't have a parts book. So I set off copying just the picture plates - the description of parts was worthless - all in Italian and a "screw" was the same for the thing that held the clock in or bolted the head onto the block.
Yes, I was scared to death of the phone call in night from Italian speaking attorneys from New Jersey but was never bothered by one tho many people stated get ready. Then along came the CD and the paper business was not needed.
I don't make them anymore I still have a box of some copies that I sell for postage only - just to help out the poor soul who has the car and needs to figure out what goes where or order parts. The CD is great but hard to fold up and take with you. heh heh
Onward, DOUG
----- Original Message ----- From: "Misc" <misc [at] 308systems.com>
To: "DOUG" <dnt [at] dock.net>
Cc: "The FerrariList" <ferrari [at] ferrarilist.com>
Sent: Sunday, June 24, 2007 4:13 PM
Subject: Re: [Ferrari] ferrari infringement ebay
Hi Michel,
Unfortunately, Ferrari ownes the copywrite to these manuals and the earliest
that copywrite will expire is 70yrs from the date of creation. Thus,
Ferrari has no incentive to support unauthorized distribution of the
manuals. I doubt a financial arrangement(giving them a cut of sales) would
be meaningful to them.
Perhaps you could play to their business side, suggesting that if you make
the manuals available, owners will be more apt to work on their vehicles and
therefore purchase Ferrari NOS parts - or realize they are in over their
heads and take their Ferrari to a dealer for service(and subsequent parts
purchase).
Good luck,
Mark Lueker 308 SYSTEMS Inc. 970-282-7006 www.308systems.com
-----Original Message----- From: Michel Savard [mailto:mysavard [at] dsuper.net] Sent: Sunday, June 24, 2007 4:00 PM To: Mark Cc: The FerrariList Subject: [Ferrari] ferrari infringement ebay
I’ve been selling copies of my parts manual (1981 308 GTSi) for many years on Ebay. A few months ago, Ebay cancelled my auction. I took the word “copy” out of the title and the description. I sold them again and it worked for a few months before Ebay cancelled my auction again saying that Ferrari doesn’t allow this.
Ebay gave me a Ferrari email address in case I wanted to bring my case to Ferrari. Now before I do that, I need some help as to what I should write to Ferrari about that. After all, they don’t make new parts manual for old cars anymore, they don’t sell copies neither. So, why do they bother ?
Please help me make a strong case to Ferrari.
Michael Savard (Canada)
No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.9.6/865 - Release Date: 6/24/2007 8:33 AM
_________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/misc%40308systems.com
Sponsored by BidNip.com eBay Auction Sniper http://www.BidNip.com/ and F1 Headlines http://www.F1Headlines.com/
_________________________________________________________________ To unsubscribe or modify your subscription options, please visit: http://lists.ferrarilist.com/mailman/options/ferrari/dnt%40dock.net
Sponsored by BidNip.com eBay Auction Sniper http://www.BidNip.com/ and F1 Headlines http://www.F1Headlines.com/
-
ferrari infringement ebay Michel Savard, June 24 2007
- Re: ferrari infringement ebay LarryT, June 24 2007
-
Re: ferrari infringement ebay Misc, June 24 2007
- Re: ferrari infringement ebay Doug and Terri Anderson, June 25 2007
- Re: ferrari infringement ebay Rick Lindsay, June 25 2007
- Re: ferrari infringement ebay Doug and Terri Anderson, June 25 2007
- Re: ferrari infringement ebay jimshadow, June 25 2007
- Re: ferrari infringement ebay Dave Handa, June 25 2007
Results generated by Tiger Technologies Web hosting using MHonArc.